Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Jul 2005 11:41:54 +0800
From:      Muzaffar Ariff <mus.bsd@gmail.com>
To:        pyunyh@gmail.com
Cc:        freebsd-multimedia@freebsd.org
Subject:   Re: ESS Maestro3 no sound
Message-ID:  <8eb2b81050713204179cb710c@mail.gmail.com>
In-Reply-To: <20050713011018.GB4479@rndsoft.co.kr>
References:  <8eb2b81050628200659d338ab@mail.gmail.com> <20050629043027.GB8832@rndsoft.co.kr> <42C2B94F.2010708@samsco.org> <20050701014258.GE17058@rndsoft.co.kr> <8eb2b810507110203229b46b@mail.gmail.com> <20050711092238.GC858@rndsoft.co.kr> <8eb2b8105071217477e240667@mail.gmail.com> <20050713011018.GB4479@rndsoft.co.kr>

next in thread | previous in thread | raw e-mail | index | archive | help
I've loaded the patch but still I'm having the same problem, xmms
plays the mp3 file but no sound. On the brightside there is no error
in /var/run/dmesg.boot like before:

pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem
0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0
pcm0: PCIR_COMMAND =3D 0x7
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9721/23 AC97 Codec>

So does anyone know what is wrong with my maestro?=20

ps: thanks for the instruction on patching the code. really appreciate it :=
)

On 7/13/05, Pyun YongHyeon <pyunyh@gmail.com> wrote:
> On Wed, Jul 13, 2005 at 08:47:00AM +0800, Muzaffar Ariff wrote:
>  > > Hmm, I'm afraid you loaded old module again. Please let me know whic=
h
>  > > FreeBSD version you used. I can make a patch for the specific FreeBS=
D
>  > > version.
>  >
>  > I'm using FreeBSD 5.3-release. Are you saying that I did the patching
>  > and loading of the patch correctly, its just you gave the wrong one?
>  > (need to know either my methods were right)
>  >
> I can't sure but your dmeseg output says it was not patched.
> Try attached patch on your system.
>=20
> 1. Save attached patch file to your system(e.g. /tmp).
> 2. Patch and build.
>         #cd /usr/src
>         #patch -p0 < /path/to/patchfile
>         #cd /usr/src/sys/modules/sound/driver/maestro3
>         #make
> 3. Load built module and experiment it.
>         #kldload ./snd_maestro3.ko
>=20
> 4. It the driver works then install it.
>         #make install
>=20
> Please let me know how it goes on your system.
>=20
> --
> Regards,
> Pyun YongHyeon
>=20
>=20
>=20


--=20
Muzaffar Ariff
mus.bsd@gmail.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8eb2b81050713204179cb710c>