Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 19 Feb 2011 18:51:25 +0800
From:      Ken Chen <ken73.chen@gmail.com>
To:        Kevin Oberman <oberman@es.net>
Cc:        freebsd-stable@freebsd.org, Doug Barton <dougb@dougbarton.us>
Subject:   Re: hold-on at 'Entropy harvesting' afer upgrading to 8.1
Message-ID:  <AANLkTimPBnBUF=eidTng%2BH2hwz0cQ=t0fWu2iZYp4X_E@mail.gmail.com>
In-Reply-To: <20110217183902.230681CC16@ptavv.es.net>
References:  <AANLkTimWMQPKue%2BmkicZtYMwV%2BjyghQzUamKQ4USmSg_@mail.gmail.com> <20110217183902.230681CC16@ptavv.es.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Thanks!

It's a production server, I will arrange some day to try.


2011/2/18 Kevin Oberman <oberman@es.net>

> > From: Ken Chen <ken73.chen@gmail.com>
> > Date: Fri, 18 Feb 2011 01:12:13 +0800
> > Sender: owner-freebsd-stable@freebsd.org
> >
> > I have tried. It can not be interrupted by CTRL-C.
> >
> > 2011/2/17 Doug Barton <dougb@dougbarton.us>
> >
> > > Ok, likely you can bypass the problem by hitting Ctrl-C.
> > >
> > > Once you get kernel and userland updated make sure that you get /etc/
> > > updated as well and you should be fine.
> > >
> > >
> > > hth,
> > >
> > > Doug
> > >
> > >
> > >
> > > On 02/16/2011 23:24, Ken Chen wrote:
> > >
> > >> It's first reboot with 8.1 kernel.
> > >>
> > >> nextboot -k GENERIC
> > >> shutdown -r now
> > >>
> > >>
> > >> 2011/2/17 Doug Barton <dougb@dougbarton.us <mailto:
> dougb@dougbarton.us>>
> > >>
> > >>
> > >>    On 02/16/2011 21:56, Ken Chen wrote:
> > >>
> > >>        Hello All,
> > >>
> > >>        I upgrade a very old machine from 6.3-RELEASE to 8.1-RELEASE by
> > >>        'freebsd-update'. After boot with 8.1 GENERIC kernel, it
> holds-on
> > >> at
> > >>        ''Entropy harvesting: '. I try to change configuration in
> > >>        /etc/defaults/rc.conf, it helpless.
> > >>
> > >>
> > >>    Did you update /etc after updating the binaries, or is this the
> > >>    first reboot after freebsd-update installs the new kernel?
> > >>
>
> While the last message to appear is "Entropy harvesting:", that may or
> may not be the cause of the hang. It really should continue after a ^C
> if that was the issue.
>
> Can you try a ^T to see what is really running? Or, if that does not
> tell you, try adding rc_debug="YES" to rc.conf. This will produce a LOT
> of output, but you probably are only interested in the end of it.
>
> Doug is WAY better at the rc issues than I am, but at least this should
> provide a bit more information.
> --
> R. Kevin Oberman, Network Engineer
> Energy Sciences Network (ESnet)
> Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
> E-mail: oberman@es.net                  Phone: +1 510 486-8634
> Key fingerprint:059B 2DDF 031C 9BA3 14A4  EADA 927D EBB3 987B 3751
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTimPBnBUF=eidTng%2BH2hwz0cQ=t0fWu2iZYp4X_E>