Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 3 Mar 2000 14:57:12 -0800
From:      Don Lewis <Don.Lewis@tsc.tdk.com>
To:        "Matthew N. Dodd" <winter@jurai.net>, Don Lewis <Don.Lewis@tsc.tdk.com>
Cc:        current@FreeBSD.ORG
Subject:   Re: 4.0-CURRENT hangs in ex_isa_identify() (was: current hangs during boot if ET/5025-16 card is installed)
Message-ID:  <200003032257.OAA11170@salsa.gv.tsc.tdk.com>
In-Reply-To: <Pine.BSF.4.21.0003031112150.690-100000@sasami.jurai.net>
References:   <Pine.BSF.4.21.0003031112150.690-100000@sasami.jurai.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mar 3, 11:16am, "Matthew N. Dodd" wrote:
} Subject: Re: 4.0-CURRENT hangs in ex_isa_identify() (was: current hangs du
} On Fri, 3 Mar 2000, Don Lewis wrote:
} > What really sucks is that there is no way to disable the ex driver
} > at boot time, so the standard install floppies can no longer be used
} > to boot a box that contains one of these ET cards.
} > 
} > Should the ex driver be doing all this stuff at identify time, or was
} > the older method of doing this at probe time more correct?
} 
} Thats really the only place for such a routine.  What needs to happen is
} for if_ex to a little more selective about which addresses it
} probes.  While it is using a non-destructive probe (see
} look_for_card()) it should also use the resource manager to check and see
} if a port is assigned before it does anything else.

Unfortunately the GENERIC kernel doesn't have a driver that could claim
the ET card.  Also ex_isa_identify() is called before the legacy ISA
probes are done.

IMHO, the best way to fix this would be for the dual-mode PnP/legacy
drivers to identify any cards in PnP mode, then do legacy ISA probes
using the old hard-wired port numbers, where legacy ISA probes can
be controlled by userconfig.  This is really ugly, but then we all
agree that ISA sucks.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003032257.OAA11170>