Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 21 Sep 2004 18:25:41 +0400
From:      Roman Kurakin <rik@cronyx.ru>
To:        Ion-Mihai Tetcu <itetcu@people.tecnik93.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: BETA5 regression - reboots -reproducible
Message-ID:  <415039E5.10205@cronyx.ru>
In-Reply-To: <20040919121953.5de84a64@it.buh.tecnik93.com>
References:  <20040919121953.5de84a64@it.buh.tecnik93.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Check you hardware. I have almost the same problems with my station that
currently Linux/Windows. My problem is not so stable as yours, but looks
simular. I didn't see it in text mode, but in graphical mode it occurres 
time to
time. I believe that this is hardware problem. Check for hardware first, for
example if chip is overheated if card is properly inserted.

Did you see some delay after system is dead and before it reboots?

rik

Ion-Mihai Tetcu wrote:

>Hi,
>
>
>The "good" news is the it happens every time. The bad one - nothing
>logged and no idea what it happens.
>
>My "old" kernel+world was a BETA4 just before the apparition of
>debug.witness oids. The new one is:
> # uname -a
>FreeBSD it.buh.tecnik93.com 5.3-BETA5 FreeBSD 5.3-BETA5 #6: Sat Sep 18 22:55:04 EEST 2004     itetcu@it.buh.tecnik93.com:/usr/obj/usr/src/sys/IT53_b3_df  i386
>so the time frame is pretty small.
>
>Kernel and world were build with NOCLEAN (I'm rebuilding now after
>removing /usr/obj).
>
>The problem:
>Each time I try to play a video file with gmplayer or mplayer the system
>reboots; no error logged.
>
>This is a ULE, apic, agp kernel, with witness (but running with or without
>debug.witness.watch makes no difference) and invariants (see attached
>conf file);
>root(root)@it> /root [12:08:43] 0 # ll /etc/malloc.conf
>lrwxr-xr-x  1 root  wheel  2 Sep  7 13:16 /etc/malloc.conf -> aj
>
>An old BETA3 kernel that happens to lay around works.
>
>The only thing I've noticed is that X takes a little longer to load (I
>mean the initial X screen with the X mouse cursor stays a few seconds
>before turning into KDE start-up screen).
>
>
>Also running Xorg with or without dri makes no difference.
>
>This is the console dri output when loading X:
>pci0: driver added
>pci1: driver added
>found-> vendor=0x1002, dev=0x4966, revid=0x01
>        bus=1, slot=0, func=0
>        class=03-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=16
>        powerspec 2  supports D0 D1 D2 D3  current D0
>pci1:0:0: reprobing on driver added
>drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem 0xe1000000-0xe100ffff,0xd
>8000000-0xdfffffff irq 16 at device 0.0 on pci1
>info: [drm] AGP at 0xd0000000 128MB
>info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
>agp0: Setting AGP v2 mode 4
>	info: [drm] Loading R200 Microcode
>drm0: [MPSAFE]
>
>
>
>*Anything* in order to fix this is very welcome.
>
>
>Thanks,
>
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>freebsd-current@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>  
>





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?415039E5.10205>