Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Sep 2003 19:00:05 -0500 (CDT)
From:      "J.A. Terranson" <measl@mfn.org>
To:        Mike Tancsa <mike@sentex.net>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: WD drivers: Gone completely in 5.x?
Message-ID:  <Pine.BSF.4.21.0309231852180.17575-100000@greeves.mfn.org>
In-Reply-To: <6.0.0.22.0.20030923195126.08f946b8@209.112.4.2>

next in thread | previous in thread | raw e-mail | index | archive | help

On Tue, 23 Sep 2003, Mike Tancsa wrote:

> What hardware do you have that does not work with the ata drivers ?

Mike, I don't want to get into a flame war here, as I've already been through
this when the ATA drivers were first released: no matter what hardware I've
used them with, I've had issues.  The oldest I can understand, but I gave it
another go two weeks ago with modern, brand new hardware (a new SiS based
Asus that was on the HCL when I bought it, and a Maxtor 40g IDE) and had the
same results.  The 4.8 was rebuilt last night with WD drivers, and the 5.1
was *supposed* to be rebuilt tonight, thus my email.  The ATA drivers are
buggy has hell, regardless of all the screaming I've heard to the
contrary: timeouts, with or without DMA disabled, hard write errors, etc.  I
just can't do it - especially since I am constantly told the drivers are
good, and my hardware is bad: if I take the setup that dies under ATA and
load either WD or *any other OS*, they work flawlessly.

I am a FBSD shop, have been since 2.2.5R, but I cannot use the ATA drivers -
I need something reliable (speed is irrelevant if it doesn't work).

Hrmmm.... I wasn't meaning to rant on you.  I just looked up and there it was
:-(   Sorry...  Frustration.

> 
>          ---Mike

//Alif



> At 07:40 PM 23/09/2003, J.A. Terranson wrote:
> 
> >Yes, I know they are obsolete.  Nevertheless, they have their place, and I
> >have no been able to get a config to run against a wd specifying conf-file.
> >
> >Are they truly gone, or is there a magic chicken I can wave over the configs
> >to make them work yet again?
> >
> >I am not subbed to the list, so please reply directly as well as to the list.
> >
> >Thanks!!!
> >
> >--
> >Yours,
> >J.A. Terranson
> >sysadmin@mfn.org
> >
> >         "Every living thing dies alone."
> >         Donnie Darko
> >
> >_______________________________________________
> >freebsd-questions@freebsd.org mailing list
> >http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
> 
> 

-- 
Yours, 
J.A. Terranson
sysadmin@mfn.org

	"Every living thing dies alone."
	Donnie Darko



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0309231852180.17575-100000>