Date: Thu, 22 Dec 2016 11:51:27 +0500 From: "Eugene M. Zheganin" <emz@norma.perm.ru> To: freebsd-stable <freebsd-stable@freebsd.org> Subject: camcontrol rescan seems to be broken Message-ID: <585B77EF.2000805@norma.perm.ru>
next in thread | raw e-mail | index | archive | help
Hi, could anyone tell me where am I wrong: # camcontrol rescan all camcontrol: CAMIOCOMMAND ioctl failed: Invalid argument # uname -U 1100122 # uname -K 1100122 # uname -a FreeBSD bsdrookie.norma.com. 11.0-RELEASE-p5 FreeBSD 11.0-RELEASE-p5 #0 r310364: Wed Dec 21 19:03:58 YEKT 2016 emz@bsdrookie.norma.com.:/usr/obj/usr/src/sys/BSDROOKIE amd64 # camcontrol devlist <ST1000DM003-1CH162 CC46> at scbus0 target 0 lun 0 (pass0,ada0) <ST32000542AS CC34> at scbus1 target 0 lun 0 (pass1,ada1) <ST2000DM001-1CH164 CC24> at scbus2 target 0 lun 0 (pass2,ada2) <WDC WD5003ABYX-01WERA0 01.01S01> at scbus3 target 0 lun 0 (pass3,ada3) <ATAPI iHAS124 W HL03> at scbus4 target 0 lun 0 (cd0,pass4) <AHCI SGPIO Enclosure 1.00 0001> at scbus5 target 0 lun 0 (pass5,ses0) <SanDisk Cruzer Fit 1.26> at scbus6 target 0 lun 0 (da0,pass6) # egrep 'ahci0|ada' /var/run/dmesg.boot ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7202000-0xf72027ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC46> ATA8-ACS SATA 3.x device ada0: Serial Number Z1D45ETV ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST32000542AS CC34> ATA8-ACS SATA 2.x device ada1: Serial Number 5XW0K4AP ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST2000DM001-1CH164 CC24> ATA8-ACS SATA 3.x device ada2: Serial Number Z1E2SLEV ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD5003ABYX-01WERA0 01.01S01> ATA8-ACS SATA 2.x device ada3: Serial Number WD-WMAYP0516506 ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 476940MB (976773168 512 byte sectors) GEOM: ada3: the primary GPT table is corrupt or invalid. GEOM: ada3: using the secondary instead -- recovery strongly advised. GEOM_ELI: Device ada2p5.eli created. ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7202000-0xf72027ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC46> ATA8-ACS SATA 3.x device ada0: Serial Number Z1D45ETV ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST32000542AS CC34> ATA8-ACS SATA 2.x device ada1: Serial Number 5XW0K4AP ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST2000DM001-1CH164 CC24> ATA8-ACS SATA 3.x device ada2: Serial Number Z1E2SLEV ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD5003ABYX-01WERA0 01.01S01> ATA8-ACS SATA 2.x device ada3: Serial Number WD-WMAYP0516506 ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 476940MB (976773168 512 byte sectors) Thanks. Eugene.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?585B77EF.2000805>