Date: Fri, 4 Nov 2005 18:07:07 +0100 From: Jochen Gensch <incmc@gmx.de> To: freebsd-current@freebsd.org Subject: Problems with Atheros 108Mbit cards Message-ID: <200511041807.07477.incmc@gmx.de>
next in thread | raw e-mail | index | archive | help
Hi, I recently bought a Netgear WG511T. However the connection always breaks do= wn=20 after a few seconds. It worked fine with an Atheros 54 Mbit chip before and= I=20 haven't changed the config.=20 I can see a valid turbo mode via ifconfig -m ath0. But if I run wpa_supplic= ant=20 manually I shows the following output: wpa_supplicant -i ath0 -d -c /etc/wpa_supplicant.conf Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'defau= lt' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface=3D'/var/run/wpa_supplicant' ctrl_interface_group=3D0 (from group name 'wheel') Priority group 0 =A0 =A0id=3D0 ssid=3D'DA-BUTZE-COE' Initializing interface (2) 'ath0' Own MAC address: 00:0f:b5:26:a9:e5 wpa_driver_bsd_set_wpa: enabled=3D1 wpa_driver_bsd_set_wpa_internal: wpa=3D3 privacy=3D1 wpa_driver_bsd_del_key: keyidx=3D0 wpa_driver_bsd_del_key: keyidx=3D1 wpa_driver_bsd_del_key: keyidx=3D2 wpa_driver_bsd_del_key: keyidx=3D3 wpa_driver_bsd_set_countermeasures: enabled=3D0 wpa_driver_bsd_set_drop_unencrypted: enabled=3D1 Setting scan request: 0 sec 100000 usec Using existing control interface directory. Starting AP scan (broadcast SSID) Received 0 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 0 0: 00:0f:b5:e7:17:90 ssid=3D'DA-BUTZE-COE' wpa_ie_len=3D24 rsn_ie_len=3D0 =A0 =A0selected Trying to associate with 00:0f:b5:e7:17:90 (SSID=3D'DA-BUTZE-COE' freq=3D24= 37 MHz) Cancelling scan request Automatic auth_alg selection: 0x1 WPA: using IEEE 802.11i/D3.0 WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 WPA: using GTK TKIP WPA: using PTK TKIP WPA: using KEY_MGMT WPA-PSK WPA: Own WPA IE - hexdump(len=3D24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01= 00=20 00 50 f2 02 01 00 00 50 f2 02 No keys have been configured - skip key clearing wpa_driver_bsd_set_drop_unencrypted: enabled=3D1 wpa_driver_bsd_associate: ssid 'DA-BUTZE-COE' wpa ie len 24 pairwise 2 grou= p 2=20 key mgmt 1 wpa_driver_bsd_associate: set PRIVACY 1 Setting authentication timeout: 5 sec 0 usec Association event - clear replay counter Associated to a new BSS: BSSID=3D00:0f:b5:e7:17:90 No keys have been configured - skip key clearing Associated with 00:0f:b5:e7:17:90 Setting authentication timeout: 10 sec 0 usec RX EAPOL from 00:0f:b5:e7:17:90 Setting authentication timeout: 10 sec 0 usec IEEE 802.1X RX: version=3D1 type=3D3 length=3D95 =A0 EAPOL-Key type=3D254 WPA: RX message 1 of 4-Way Handshake from 00:0f:b5:e7:17:90 (ver=3D1) WPA: Renewed SNonce - hexdump(len=3D32): 56 11 5b 20 7a fe 58 40 bd de 36 9= 4 b3=20 10 4b 02 74 eb 76 22 6e e4 c8 c6 1f fc 58 76 6a 11 12 de WPA: PMK - hexdump(len=3D32): [REMOVED] WPA: PTK - hexdump(len=3D64): [REMOVED] WPA: EAPOL-Key MIC - hexdump(len=3D16): 21 59 6d c1 21 5a 8d 7a 84 c7 bc 3e= e0=20 23 ee f8 WPA: Sending EAPOL-Key 2/4 RX EAPOL from 00:0f:b5:e7:17:90 IEEE 802.1X RX: version=3D1 type=3D3 length=3D95 =A0 EAPOL-Key type=3D254 WPA: RX message 1 of 4-Way Handshake from 00:0f:b5:e7:17:90 (ver=3D1) WPA: PMK - hexdump(len=3D32): [REMOVED] WPA: PTK - hexdump(len=3D64): [REMOVED] WPA: EAPOL-Key MIC - hexdump(len=3D16): 0c b4 7f 79 85 a6 c5 dd 6a 6b a7 7d= 47=20 83 77 81 WPA: Sending EAPOL-Key 2/4 RX EAPOL from 00:0f:b5:e7:17:90 IEEE 802.1X RX: version=3D1 type=3D3 length=3D95 =A0 EAPOL-Key type=3D254 WPA: RX message 1 of 4-Way Handshake from 00:0f:b5:e7:17:90 (ver=3D1) WPA: PMK - hexdump(len=3D32): [REMOVED] WPA: PTK - hexdump(len=3D64): [REMOVED] WPA: EAPOL-Key MIC - hexdump(len=3D16): c7 77 0c 48 71 d8 b2 7e 1e 7f 64 fb= eb=20 3c 26 51 WPA: Sending EAPOL-Key 2/4 RX EAPOL from 00:0f:b5:e7:17:90 IEEE 802.1X RX: version=3D1 type=3D3 length=3D95 =A0 EAPOL-Key type=3D254 WPA: RX message 1 of 4-Way Handshake from 00:0f:b5:e7:17:90 (ver=3D1) WPA: PMK - hexdump(len=3D32): [REMOVED] WPA: PTK - hexdump(len=3D64): [REMOVED] WPA: EAPOL-Key MIC - hexdump(len=3D16): cc 40 2b 73 50 b3 21 e5 85 f3 1c 48= 45=20 e9 3a 35 WPA: Sending EAPOL-Key 2/4 Setting scan request: 0 sec 100000 usec Added BSSID 00:0f:b5:e7:17:90 into blacklist Disconnect event - remove keys wpa_driver_bsd_del_key: keyidx=3D0 wpa_driver_bsd_del_key: keyidx=3D1 wpa_driver_bsd_del_key: keyidx=3D2 wpa_driver_bsd_del_key: keyidx=3D3 wpa_driver_bsd_del_key: addr=3D00:00:00:00:00:00 keyidx=3D0 ioctl[SIOCS80211, op 20, len 7]: Can't assign requested address And after that last message the connection breaks down again... thanks for = any=20 help. Jochen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511041807.07477.incmc>