Date: Fri, 3 Jun 2011 20:09:59 GMT From: Tino <tinotom@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/157568: amdsbwd driver does not attach Message-ID: <201106032009.p53K9xem046394@red.freebsd.org> Resent-Message-ID: <201106032010.p53KA86t072079@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 157568 >Category: kern >Synopsis: amdsbwd driver does not attach >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jun 03 20:10:08 UTC 2011 >Closed-Date: >Last-Modified: >Originator: Tino >Release: 8.2-STABLE >Organization: None >Environment: System: FreeBSD stone 8.2-STABLE FreeBSD 8.2-STABLE #9: Wed Jun 1 22:14:01 CEST 2011 tinotom@stone:/storage/systembuild/usr/src/sys/STONE amd64 >Description: amdsbwd driver does not attach to wd with the following error (from /var/run/dmesg.boot): amdsbwd0: <AMD SB600/SB7xx Watchdog Timer> at iomem 0xbafe00-0xbafe03,0xbafe04-0xbafe07 on isa0 amdsbwd0: bus_alloc_resource for ctrl failed device_attach: amdsbwd0 attach returned 6 The mainboard is an E35M1-I deluxe from Asus ( http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/ ) compile options in make.conf: CFLAGS=-O -pipe NOPROFILE=true Here's kernel boot: Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-STABLE #9: Wed Jun 1 22:14:01 CEST 2011 tinotom@stone:/storage/systembuild/usr/src/sys/STONE amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD E-350 Processor (1599.97-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x500f10 Family = 14 Model = 1 Stepping = 0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 7821377536 (7459 MB) ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655) ioapic0: Changing APIC ID to 0 ioapic0 <Version 2.1> irqs 0-23 on motherboard Cuse4BSD v0.1.14 @ /dev/cuse kbd1 at kbdmux0 acpi0: <ALASKA A M I> on motherboard acpi0: [ITHREAD] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20101013/psargs-464) ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20101013/nsinit-452) acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff,0xfe700000-0xfe7fffff irq 18 at device 1.0 on pci0 pci0: <multimedia, HDA> at device 1.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ahci0: <ATI IXP700 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4b000-0xfeb4b3ff irq 19 at device 17.0 on pci0 ahci0: [ITHREAD] ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [ITHREAD] ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [ITHREAD] ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: [ITHREAD] ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich3: [ITHREAD] ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich4: [ITHREAD] ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 18.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb49000-0xfeb490ff irq 17 at device 18.2 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 ohci1: <OHCI (generic) USB controller> mem 0xfeb48000-0xfeb48fff irq 18 at device 19.0 on pci0 ohci1: [ITHREAD] usbus2: <OHCI (generic) USB controller> on ohci1 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfeb47000-0xfeb470ff irq 17 at device 19.2 on pci0 ehci1: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 ohci2: <OHCI (generic) USB controller> mem 0xfeb46000-0xfeb46fff irq 18 at device 20.5 on pci0 ohci2: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci2 pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci3: <ACPI PCI bus> on pcib3 ath0: <Atheros 9285> mem 0xfea00000-0xfea0ffff irq 16 at device 0.0 on pci3 ath0: [ITHREAD] ath0: AR9285 mac 192.2 RF5133 phy 14.0 pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci4 re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: f4:6d:04:d9:94:74 re0: [ITHREAD] pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0 pci5: <ACPI PCI bus> on pcib5 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe900000-0xfe901fff irq 18 at device 0.0 on pci5 xhci0: [ITHREAD] xhci0: 32 byte context size. usbus5 on xhci0 pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0 pci6: <ACPI PCI bus> on pcib6 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe800000-0xfe801fff irq 19 at device 0.0 on pci6 xhci1: [ITHREAD] xhci1: 32 byte context size. usbus6 on xhci1 ohci3: <OHCI (generic) USB controller> mem 0xfeb45000-0xfeb45fff irq 18 at device 22.0 on pci0 ohci3: [ITHREAD] usbus7: <OHCI (generic) USB controller> on ohci3 ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfeb44000-0xfeb440ff irq 17 at device 22.2 on pci0 ehci2: [ITHREAD] usbus8: EHCI version 1.0 usbus8: <EHCI (generic) USB 2.0 controller> on ehci2 amdtemp0: <AMD K8 Thermal Sensors> on hostb4 acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] amdsbwd0: <AMD SB600/SB7xx Watchdog Timer> at iomem 0xbafe00-0xbafe03,0xbafe04-0xbafe07 on isa0 amdsbwd0: bus_alloc_resource for ctrl failed device_attach: amdsbwd0 attach returned 6 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version 4 ZFS storage pool version 15 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding disabled, default to accept, logging disabled usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 5.0Gbps Super Speed USB v3.0 usbus6: 5.0Gbps Super Speed USB v3.0 usbus7: 12Mbps Full Speed USB v1.0 usbus8: 480Mbps High Speed USB v2.0 ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <0x1033> at usbus5 uhub5: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 ugen6.1: <0x1033> at usbus6 uhub6: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6 ugen7.1: <ATI> at usbus7 uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 ugen8.1: <ATI> at usbus8 uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 ada0: <ST32000542AS CC34> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 ada1: <ST31500541AS CC34> ATA-8 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C) ada2 at ahcich4 bus 0 scbus4 target 0 lun 0 ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) SMP: AP CPU #1 Launched! uhub4: 2 ports with 2 removable, self powered uhub7: 4 ports with 4 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub5: 4 ports with 4 removable, self powered uhub6: 4 ports with 4 removable, self powered Root mount waiting for: usbus8 usbus5 usbus3 usbus1 ugen5.2: <American Power Conversion> at usbus5 uhub8: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered Root mount waiting for: usbus8 usbus1 Trying to mount root from zfs:zfs/root ugen7.2: <vendor 0x0cf3> at usbus7 ugen0.2: <ADMtek> at usbus0 aue0: <ADMtek USB To LAN Converter, rev 1.10/2.01, addr 2> on usbus0 miibus1: <MII bus> on aue0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: <USB Ethernet> on aue0 ue0: Ethernet address: 00:60:6e:00:05:dc wlan0: Ethernet address: e0:b9:a2:7f:dc:1e Here's the output of pciconf -lv: hostb0@pci0:0:0:0: class=0x060000 card=0x84a51043 chip=0x15101022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI vgapci0@pci0:0:1:0: class=0x030000 card=0x84a51043 chip=0x98021002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = display subclass = VGA none0@pci0:0:1:1: class=0x040300 card=0x84a51043 chip=0x13141002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = multimedia subclass = HDA pcib1@pci0:0:4:0: class=0x060400 card=0x12341022 chip=0x15121022 rev=0x00 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = PCI-PCI ahci0@pci0:0:17:0: class=0x010601 card=0x84961043 chip=0x43911002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 SATA Controller [AHCI mode]' class = mass storage subclass = SATA ohci0@pci0:0:18:0: class=0x0c0310 card=0x84961043 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI0 Controller' class = serial bus subclass = USB ehci0@pci0:0:18:2: class=0x0c0320 card=0x84961043 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB EHCI Controller' class = serial bus subclass = USB ohci1@pci0:0:19:0: class=0x0c0310 card=0x84961043 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI0 Controller' class = serial bus subclass = USB ehci1@pci0:0:19:2: class=0x0c0320 card=0x84961043 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB EHCI Controller' class = serial bus subclass = USB none1@pci0:0:20:0: class=0x0c0500 card=0x84961043 chip=0x43851002 rev=0x42 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'ATI SMBus (ATI RD600/RS600)' class = serial bus subclass = SMBus isab0@pci0:0:20:3: class=0x060100 card=0x84961043 chip=0x439d1002 rev=0x40 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 LPC host controller' class = bridge subclass = PCI-ISA pcib2@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'IXP SB600 PCI to PCI Bridge' class = bridge subclass = PCI-PCI ohci2@pci0:0:20:5: class=0x0c0310 card=0x84961043 chip=0x43991002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI2 Controller' class = serial bus subclass = USB pcib3@pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = bridge subclass = PCI-PCI pcib4@pci0:0:21:1: class=0x060400 card=0x00001002 chip=0x43a11002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = bridge subclass = PCI-PCI pcib5@pci0:0:21:2: class=0x060400 card=0x00001002 chip=0x43a21002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = bridge subclass = PCI-PCI pcib6@pci0:0:21:3: class=0x060400 card=0x00001002 chip=0x43a31002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = bridge subclass = PCI-PCI ohci3@pci0:0:22:0: class=0x0c0310 card=0x84961043 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI0 Controller' class = serial bus subclass = USB ehci2@pci0:0:22:2: class=0x0c0320 card=0x84961043 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB EHCI Controller' class = serial bus subclass = USB hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI hostb6@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI hostb7@pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI hostb8@pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI ath0@pci0:3:0:0: class=0x028000 card=0x1d891a3b chip=0x002b168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'Atheros AR9285 Wireless LAN 802.11 a/b/g/n Controller (AR928x)' class = network re0@pci0:4:0:0: class=0x020000 card=0x84321043 chip=0x816810ec rev=0x06 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)' class = network subclass = ethernet xhci0@pci0:5:0:0: class=0x0c0330 card=0x84131043 chip=0x01941033 rev=0x03 hdr=0x00 vendor = 'NEC Electronics Hong Kong' class = serial bus subclass = USB xhci1@pci0:6:0:0: class=0x0c0330 card=0x84131043 chip=0x01941033 rev=0x03 hdr=0x00 vendor = 'NEC Electronics Hong Kong' class = serial bus subclass = USB >How-To-Repeat: It happens on every boot. The driver does not attach at all. >Fix: No fix found >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201106032009.p53K9xem046394>