Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Feb 2004 09:20:21 +0200
From:      Nelis Lamprecht <nelis@8ball.co.za>
To:        freebsd-stable@freebsd.org
Subject:   dual ( HP ProLiant ML350 ) kernel config ?
Message-ID:  <1076397621.274.469.camel@enigma.8ball.co.za>

next in thread | raw e-mail | index | archive | help

--=-nPne3BiU4cVJ95sBk6kp
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable

Sorry for cross-posting ( sent to freebsd-hardware ) but not sure where
this would be most applicable...

Hi,

I am trying to build a SMP kernel ( FreeBSD 4.9 ) on our new dual Xeon
2.8ghz HP server.
Although I've been using FreeBSD for many years this is my first SMP
machine and I'm not having any luck.
I can't recall the exact error but the machine boots up and then throws
out a bunch of errors relating to IOAPIC programming before it freezes.

Please could someone take a look at my very basic kernel config to see
if there is anything that I have left out that may be causing the
problem. I've pasted dmesg also so you can see the hardware probe.

Thank you kindly.

#########################kernel config#########################

machine         i386
cpu             I686_CPU
ident           GUARDIAN
maxusers        0
=20
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep
this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big
directories
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS
required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660
required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP
THIS!]
options         SCSI_DELAY=3D5000         #Delay (in ms) before probing
SCSI
options         UCONSOLE                #Allow users to grab the console
options         USER_LDT                #allow user-level control of
i386 ldt
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time
extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in
debug
=20
# Firewall support.
#options IPFILTER
#options IPFILTER_LOG
#options IPFILTER_DEFAULT_BLOCK
=20
# To make an SMP kernel, the next two are needed
options         SMP                     # Symmetric MultiProcessor
Kernel
options         APIC_IO                 # Symmetric (APIC) I/O
=20
device          isa
device          pci
=20
# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0
device          fd1     at fdc0 drive 1
=20
# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering
=20
# SCSI Controllers
device          ahc             # AHA2940 and onboard AIC7xxx devices
=20
# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          pass            # Passthrough device (direct SCSI
access)
=20
# RAID controllers interfaced to the SCSI subsystem
device          ciss            # Compaq SmartRAID 5* series
=20
# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12
=20
device          vga0    at isa?
=20
# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100
=20
# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13
=20
# Power management support (see LINT for more options)
#device         apm0    at nexus? disable flags 0x20 # Advanced Power
Management
=20
# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
#device         sio2    at isa? disable port IO_COM3 irq 5
#device         sio3    at isa? disable port IO_COM4 irq 9
=20
# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
=20
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device          miibus          # MII bus support
device          bge             # Broadcom BCM570x (``Tigon III'')
=20
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif             # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)
=20
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter
=20
# USB support
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus
and da

#######################dmesg###########################

FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
    root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2790.73-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0xf29  Stepping =3D 9
=20
Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C=
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  =3D 1342152704 (1310696K bytes)
config> di pcic0
config> di bt0
config> di adv0
config> q
avail memory =3D 1299718144 (1269256K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc053f09c.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port
0x2400-0x24ff mem 0xf7df0000-0xf7df0fff irq 3 at device 2.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port
0x2800-0x28ff mem 0xf7de0000-0xf7de0fff irq 3 at device 2.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf5fe0000-0xf5feffff irq 5 at device 4.0 on pci0
bge0: Ethernet address: 00:0b:cd:cc:79:d5
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
pci0: <unknown card> (vendor=3D0x0e11, dev=3D0xa0f0) at 5.0 irq 10
isab0: <PCI to ISA bridge (vendor=3D1166 device=3D0201)> at device 15.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port
0x2000-0x200f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf5fc0000-0xf5fc0fff irq 11
at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
ciss0: <HP Smart Array 641> port 0x3000-0x30ff mem
0xf7e80000-0xf7ebffff,0xf7ef0000-0xf7ef1fff irq 15 at device 1.0 on pci2
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci4: <PCI bus> on pcib4
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci5: <PCI bus> on pcib5
bge1: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1100> mem
0xf7ff0000-0xf7ffffff irq 11 at device 1.0 on pci5
bge1: Ethernet address: 00:08:02:91:3a:fd
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0729 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xcd800-0xcefff,0xee000-0xe=
ffff on isa0pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
acd0: CDROM <LTN486S> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc1 bus 0 target 6 lun 0
sa0: <COMPAQ SDX-500C 1.35> Removable Sequential Access SCSI-2 device
sa0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit)
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
Mounting root from ufs:/dev/da0s1a



--=20
Nelis Lamprecht
PGP: http://www.8ball.co.za/pgpkey/nelis.asc
"Unix IS user friendly.. It's just selective about who its friends are."

--=-nPne3BiU4cVJ95sBk6kp
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (FreeBSD)

iD8DBQBAKIY1QfIMKiRMCrERAm4EAJ9N7vR/jc+izx6wdW07DxG+0CVFGQCgybDc
SWHyAdTG7agMgu+qsKMisyg=
=nRRg
-----END PGP SIGNATURE-----

--=-nPne3BiU4cVJ95sBk6kp--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1076397621.274.469.camel>