Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Dec 2016 20:43:11 +0300
From:      Slawa Olhovchenkov <slw@zxy.spb.ru>
To:        Konstantin Belousov <kostikbel@gmail.com>
Cc:        current@freebsd.org
Subject:   Re: Enabling NUMA in BIOS stop booting FreeBSD
Message-ID:  <20161212174311.GE90287@zxy.spb.ru>
In-Reply-To: <20161212172418.GK54029@kib.kiev.ua>
References:  <20161211191626.GI31311@zxy.spb.ru> <20161211192656.GZ54029@kib.kiev.ua> <20161211194559.GJ31311@zxy.spb.ru> <20161211200654.GA54029@kib.kiev.ua> <20161211204709.GK31311@zxy.spb.ru> <20161212145418.GF54029@kib.kiev.ua> <20161212162152.GC90287@zxy.spb.ru> <20161212165457.GI54029@kib.kiev.ua> <20161212171634.GD90287@zxy.spb.ru> <20161212172418.GK54029@kib.kiev.ua>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Dec 12, 2016 at 07:24:18PM +0200, Konstantin Belousov wrote:

> On Mon, Dec 12, 2016 at 08:16:34PM +0300, Slawa Olhovchenkov wrote:
> > On Mon, Dec 12, 2016 at 06:54:57PM +0200, Konstantin Belousov wrote:
> > 
> > > On Mon, Dec 12, 2016 at 07:21:53PM +0300, Slawa Olhovchenkov wrote:
> > > > On Mon, Dec 12, 2016 at 04:54:18PM +0200, Konstantin Belousov wrote:
> > > > 
> > > > > On Sun, Dec 11, 2016 at 11:47:09PM +0300, Slawa Olhovchenkov wrote:
> > > > > > Booting...
> > > > > > ESC[01;00H8+0x8+0xe9bdc]                                                                  KDB: debugger backends: ddb
> > > > > > KDB: current backend: ddb
> > > > > > exit from kdb_init
> > > > > > KDB: enter: Boot flags requested debugger
> > > > > > [ thread pid 0 tid 0 ]
> > > > > - remove any video consoles from the HEAD kernel config, i.e. sc/vt and
> > > > >   vga/efi,
> > > > > - do not use boot -d,
> > > > > - use serial console (IPMI SOL qualifies),
> > > > > - set late console to 0,
> > > > > and show me the verbose dmesg of such boot with the BIOS options
> > > > > which cause troubles.
> > > > 
> > > > Booting...
> > > > KDB: debugger backends: ddb
> > > > KDB: current backend: ddb
> > > > SMAP type=01 base=0000000000000000 len=0000000000099c00
> > > > SMAP type=02 base=0000000000099c00 len=0000000000006400
> > > > SMAP type=02 base=00000000000e0000 len=0000000000020000
> > > > SMAP type=01 base=0000000000100000 len=000000007906b000
> > > > SMAP type=02 base=000000007916b000 len=0000000000936000
> > > > SMAP type=04 base=0000000079aa1000 len=0000000000509000
> > > > SMAP type=02 base=0000000079faa000 len=0000000002056000
> > > > SMAP type=01 base=0000000100000000 len=0000001f80000000
> > > > SMAP type=02 base=000000007c000000 len=0000000014000000
> > > > SMAP type=02 base=00000000fed1c000 len=0000000000029000
> > > > SMAP type=02 base=00000000ff000000 len=0000000001000000
> > > > 
> > > > This is all. No more.
> > > When you switch between variations of the NUMA enablement options, do
> > > you just reboot the machine or do you sometimes physically turn it off ?
> > 
> > just reboot an 'power reset' via kvm client (memory preserved, i mean)
> > 
> > > Try to enable memtest, with the hw.memtest.tests=1 loader variable.
> > > Does it change things ?
> > 
> > System booted, dmesg is http://zxy.spb.ru/dmesg.numa
> I suspect now the reversed situation could take place, the non-interleaved
> option would cause hang.

No, also booted, dmesg http://zxy.spb.ru/dmesg.numa-ninter

> My current guess is that memory content is preserved but swizzled by
> the cache line sized chunks.  So that the msgbuf header, left after the
> previous boot, looks correct while the real buffer content is shuffled.
> 
> Try the debugging patch below, which unconditionally disables import of
> previous buffer.  To test, you would need to boot, then frob options in
> BIOS, reboot, again frob etc.

still need test patch? if yes, with BIOS options?

> diff --git a/sys/kern/subr_msgbuf.c b/sys/kern/subr_msgbuf.c
> index f275aef3b4f..d45ef502204 100644
> --- a/sys/kern/subr_msgbuf.c
> +++ b/sys/kern/subr_msgbuf.c
> @@ -85,7 +85,7 @@ msgbuf_reinit(struct msgbuf *mbp, void *ptr, int size)
>  {
>  	u_int cksum;
>  
> -	if (mbp->msg_magic != MSG_MAGIC || mbp->msg_size != size) {
> +	if (1 || mbp->msg_magic != MSG_MAGIC || mbp->msg_size != size) {
>  		msgbuf_init(mbp, ptr, size);
>  		return;
>  	}



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20161212174311.GE90287>