Date: Fri, 19 Sep 2003 22:12:15 +0200 From: Andreas Braukmann <braukmann@tse-online.de> To: Scott Long <scottl@freebsd.org> Cc: freebsd-scsi@FreeBSD.org Subject: Re: adaptec 2120S report Message-ID: <2147483647.1064009535@[192.168.222.11]> In-Reply-To: <3F6B1670.4040706@freebsd.org> References: <6.0.0.14.0.20030919045155.0357ab10@localhost> <3F6B1670.4040706@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
-- Scott Long <scottl@freebsd.org> wrote:
> I've having trouble reproducing this. The most obvious question that
> comes to mind is, which method of building the array are you using?
> Creation via the 'Clear' method would likely cause the problems that
> you are seeing.
The 2200S in the box besides me is in the process of building
a 20 GByte RAID 5 volume ("build/verify"-method).
Booting -current (a rather old [ca. 2003/03] snapshot install
cd) fails. The kernel freezes after announcing the presence
of the raid-volume and two error messages:
| [...]
| aac0: <Adaptec SCSI RAID 2200S> mem [...] irq 11 at device 10 on pci0
| aac0: i960RX 100MHz, 48MB cache memory, optional battery present
| aac0: Kernel 4.0-0, Build 6003, S/N b8****
| aac0: Suupported Options=1f7e<[...]>
| [...]
| aacd0: <RAID 5> on aac0
| aacd0: 20480 MB (41943040 sectors)
| aac0: Error 5 sending GetDeviceProbeInfo command
| aac0: Error 5 sending GetDeviceProbeInfo command
| [...]
I hope, that I get a fresh -current on my test machine, to
provide further testing information.
[... a few minutes later ...]
Booting from a 2003/09/13 current-snapshot-cd yields nearly the
same result.
| aac0 Error 5 sending GetDeviceProbeInfo command
| [...]
| COMMAND 0xc28d80a4 TIMEOUT AFTER 51 SECONDS
| COMMAND 0xc28d80a4 TIMEOUT AFTER 116 SECONDS
| [... and so on ...]
-Andreas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2147483647.1064009535>