Date: Wed, 9 Mar 2011 20:28:24 GMT From: Andrew Boyer <aboyer@averesystems.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/155421: System can't dump corefile Message-ID: <201103092028.p29KSOSW062304@red.freebsd.org> Resent-Message-ID: <201103092030.p29KUCqJ051592@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 155421 >Category: kern >Synopsis: System can't dump corefile >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Mar 09 20:30:12 UTC 2011 >Closed-Date: >Last-Modified: >Originator: Andrew Boyer >Release: 8.2 >Organization: Avere Systems >Environment: FreeBSD node1 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Thu Feb 17 02:41:51 UTC 2011 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 >Description: Release 8.2 (and 8.2-RC3 before it, at least) do not appear to be able to dump core. This works reliably in previous releases. node1 is an 8-core system with 72GB of RAM and a 250GB drive plugged into an onboard ICH10R SATA port. node2 is an 8-core system with 64GB of RAM and a 250GB drive plugged into an onboard ESB2 SATA port. 8.2 was installed from a USB drive. All space was allocated to the first slice and the default partition scheme was used. swap is set to 4GB. dumpdev="AUTO" is set in /etc/rc.conf, and /dev/dumpdev exists. Initiating a core with 'sysctl debug.kdb.panic=1' results in one of several hangs: - no progress at all - very, very slow progress - a secondary panic on 'bufwrite: buffer is not busy' - other secondary panics Examples: === node1 === # sysctl debug.kdb.panic=1 debug.kdb.panic: 0panic: kdb_sysctl_panic cpuid = 4 KDB: stack backtrace: ... Uptime: 20m50s Physical memory: 73706 MB Dumping 2780 MB: === node2 === # sysctl debug.kdb.panic=1 debug.kdb.panic: 0panic: kdb_sysctl_panic cpuid = 4 KDB: stack backtrace: ... Uptime: 5m50s Physical memory: 65521 MB Dumping 2437 MB: Other things I have tried with the same results: - Explicitly specifying the dump device e.g. 'dumpon -v /dev/ad0s1b' - Increasing swap from 4GB to 32GB - Changing the SATA controller mode to Compatible, Enhanced, and AHCI - Booting from a SAS HDD connected to a SAS1068e >How-To-Repeat: 1. Set dumpdev to 'AUTO' in /etc/rc.conf 2. Run '/etc/rc.d/dumpon restart', or just reboot 3. Run 'sysctl debug.kdb.panic=1' >Fix: The issue may be that the syncer is still doing filesystem updates in parallel with the attempt to dump core. I added enough debugging output to follow the dumper's progress through the first few steps of the dump. It doesn't seem right that other things are running in parallel with a panic/coredump. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201103092028.p29KSOSW062304>