Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 26 May 2009 15:25:45 +0200
From:      =?ISO-8859-1?Q?Ermal_Lu=E7i?= <eri@freebsd.org>
To:        Karsten Schmidt <gugge@guggemand.dk>
Cc:        freebsd-pf@freebsd.org
Subject:   Re: kern/132176: [pf] pf stalls connection when using route-to  [regression]
Message-ID:  <9a542da30905260625p4dda01a6l1e6ebbc7d3130266@mail.gmail.com>
In-Reply-To: <200905261100.n4QB09AE077331@freefall.freebsd.org>
References:  <200905261100.n4QB09AE077331@freefall.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, May 26, 2009 at 1:00 PM, Karsten Schmidt <gugge@guggemand.dk> wrote=
:
> The following reply was made to PR kern/132176; it has been noted by GNAT=
S.
>
> From: Karsten Schmidt <gugge@guggemand.dk>
> To: bug-followup@FreeBSD.org, link@ngc.net.ua
> Cc:
> Subject: Re: kern/132176: [pf] pf stalls connection when using route-to [=
regression]
> Date: Tue, 26 May 2009 12:40:52 +0200
>
> =A0I have the same error on a 7.2 box with a bce device and vlans
>
> =A0#pf.conf
> =A0# send all packets from x.x.x.128/26 to nonlocal addresses through x.x=
.x.129
> =A0pass out quick route-to ( bce0.11 x.x.x.129 ) from x.x.x.128/26 to
> =A0!x.x.x.128/26 no state
>
> =A0#default gateway
> =A091.208.16.1
>
> =A0#ifconfig
> =A0bce0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mt=
u 1500
>
> =A0options=3D1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWC=
SUM,TSO4>
> =A0 =A0 =A0 =A0 ether 00:1f:29:06:85:28
> =A0 =A0 =A0 =A0 inet x.x.x.125 netmask 0xffffff80 broadcast x.x.x.127
> =A0 =A0 =A0 =A0 media: Ethernet autoselect (1000baseTX <full-duplex>)
> =A0 =A0 =A0 =A0 status: active
> =A0bce0.11: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0=
 mtu
> =A01500
> =A0 =A0 =A0 =A0 options=3D3<RXCSUM,TXCSUM>
> =A0 =A0 =A0 =A0 ether 00:1f:29:06:85:28
> =A0 =A0 =A0 =A0 inet x.x.x.140 netmask 0xffffffc0 broadcast x.x.x.191
> =A0 =A0 =A0 =A0 media: Ethernet autoselect (1000baseTX <full-duplex>)
> =A0 =A0 =A0 =A0 status: active
> =A0 =A0 =A0 =A0 vlan: 11 parent interface: bce0
>
> =A0--
Can you show your complete ruleset?



--=20
Ermal



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9a542da30905260625p4dda01a6l1e6ebbc7d3130266>