Date: Fri, 31 Aug 2007 14:30:29 -0400 From: "Craig Rodrigues" <rodrigc@crodrigues.org> To: Mario Ferreira <liouxbsd@gmail.com> Cc: freebsd-current@freebsd.org Subject: Re: nfe(4) not working on asus m2n32sli-deluxe Message-ID: <20070831183029.GA18008@crodrigues.org> In-Reply-To: <683701cf0708311058l5e80198fr432abb06d8128924@mail.gmail.com> References: <683701cf0708310509l40c14a78te54e6608c2f7d9ed@mail.gmail.com> <683701cf0708311058l5e80198fr432abb06d8128924@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Kj7319i9nmIyA2yE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Fri, Aug 31, 2007 at 02:58:54PM -0300, Mario Ferreira wrote: > asus m2n32sli-deluxe wifi edition but I had some issues: > > 1) on board wlan adapter RTL8187_Wireless not supported > 2) on board lan adapter NForce 590 SLI MCP does not work > > The lack of support for RTL8187_Wireless is not a problem for now. > However, the NForce 590 SLI MCP Gigabit adapter is an issue. Hi, I just bought the exact same motherboard as you, and it works great. I do not have any issues with the Gigabit adapter. nfe0@pci0:16:0: class=0x068000 card=0xcb841043 chip=0x037310de rev=0xa2 hdr=0x00 nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether 00:1b:fc:62:b3:68 media: Ethernet autoselect (100baseTX <full-duplex>) status: active There are some BIOS settings related to "LAN Cable Status" that you might want to fiddle with. If you have further problems, you can follow up with me directly. -- Craig Rodrigues rodrigc@crodrigues.org --Kj7319i9nmIyA2yE Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot.txt" nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 16.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000 nfe0: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfe029000 nfe0: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfe028000 nfe0: attempting to allocate 8 MSI-X vectors (8 supported) nfe0: using IRQs 256-263 for MSI-X nfe0: Using 8 MSIX messages miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1b:fc:62:b3:68 nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe0: [MPSAFE] nfe0: [FILTER] nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 17.0 on pci0 nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe027000 nfe1: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfe026000 nfe1: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfe025000 nfe1: attempting to allocate 8 MSI-X vectors (8 supported) nfe1: using IRQs 264-271 for MSI-X nfe1: Using 8 MSIX messages miibus1: <MII bus> on nfe1 e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe1: bpf attached nfe1: Ethernet address: 00:1b:fc:62:be:56 nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] nfe1: [MPSAFE] nfe1: [FILTER] --Kj7319i9nmIyA2yE--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070831183029.GA18008>