Date: Sat, 04 Feb 2006 16:54:40 +0100 From: Marcin Koziej <creep@desk.pl> To: freebsd-usb@freebsd.org Subject: Genesys GL811USB(ata to usb) set address failed. Message-ID: <43E4CE40.2030405@desk.pl> In-Reply-To: <mailman.0.1139060101.95159.freebsd-usb@freebsd.org> References: <mailman.0.1139060101.95159.freebsd-usb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi. I have a USB-attached, portable hdd, based on hitachi harddrive and GL811USB based ATA to USB bridge. My system is: FreeBSD 6.1-PRERELEASE #0: Sat Feb 4 13:33:24 CET 2006 (cvsupped today) My system doesn't seam to recognise the device, when I plug it in. If at least the device reported its vendor/product, there could be a quirk to add, but without it, what can i do? USB_DEBUG: ---device plugged start--- Feb 4 14:10:23 carnivore kernel: ehci_pcd: change=0x08 Feb 4 14:10:24 carnivore kernel: ehci after reset, status=0x00001002 Feb 4 14:10:24 carnivore kernel: ehci_disown: index=3 lowspeed=0 Feb 4 14:10:24 carnivore kernel: uhci_root_ctrl_control type=0xa3 request=00 Feb 4 14:10:24 carnivore kernel: uhci_root_ctrl_control type=0x23 request=01 Feb 4 14:10:24 carnivore kernel: uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=16 Feb 4 14:10:24 carnivore kernel: ehci_pcd: change=0x08 Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0x23 request=03 Feb 4 14:10:25 carnivore kernel: uhci port 1 reset, status0 = 0x068a Feb 4 14:10:25 carnivore kernel: uhci port 1 reset, status1 = 0x049b Feb 4 14:10:25 carnivore kernel: uhci port 1 iteration 9, status = 0x049f Feb 4 14:10:25 carnivore kernel: uhci port 1 iteration 8, status = 0x0495 Feb 4 14:10:25 carnivore kernel: uhci port 1 reset, status2 = 0x0495 --repeated sequence:--- Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0xa3 request=00 Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0x23 request=01 Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=20 Feb 4 14:10:25 carnivore kernel: uhci_root_ctrl_control type=0xa3 request=00 Feb 4 14:10:25 carnivore kernel: uhci_open: pipe=0xc417f580, addr=0, endpt=0 (1) Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x00, request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0 Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x82, request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0 Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x00, request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0 Feb 4 14:10:25 carnivore kernel: uhci_device_control type=0x82, request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0 Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x00, request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0 Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x82, request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0 Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x00, request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0 Feb 4 14:10:26 carnivore kernel: uhci_device_control type=0x82, request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0 Feb 4 14:10:26 carnivore kernel: usb_new_device: set address 2 failed - trying a port reset Feb 4 14:10:26 carnivore kernel: uhci_root_ctrl_control type=0x23 request=03 Feb 4 14:10:26 carnivore kernel: uhci port 1 reset, status0 = 0x068a Feb 4 14:10:26 carnivore kernel: uhci port 1 reset, status1 = 0x049b Feb 4 14:10:26 carnivore kernel: uhci port 1 iteration 9, status = 0x049f Feb 4 14:10:26 carnivore kernel: uhci port 1 iteration 8, status = 0x0495 Feb 4 14:10:26 carnivore kernel: uhci port 1 reset, status2 = 0x0495 ----same sequence twice--- Feb 4 14:10:29 carnivore kernel: uhci_root_ctrl_control type=0xa3 request=00 Feb 4 14:10:29 carnivore kernel: uhci_root_ctrl_control type=0x23 request=01 Feb 4 14:10:29 carnivore kernel: uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=20 Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x00, request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0 Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x82, request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0 Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x00, request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0 Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x82, request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0 Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x00, request=0x05, wValue=0x0002, wIndex=0x0000 len=0, addr=0, endpt=0 Feb 4 14:10:30 carnivore kernel: uhci_device_control type=0x82, request=0x00, wValue=0x0000, wIndex=0x0000 len=2, addr=0, endpt=0 Feb 4 14:10:30 carnivore kernel: usb_new_device: set address 2 failed Feb 4 14:10:30 carnivore kernel: uhub_explore: usb_new_device failed, error=SET_ADDR_FAILED Feb 4 14:10:30 carnivore kernel: uhub1: device problem (SET_ADDR_FAILED), disabling port 1 Feb 4 14:10:30 carnivore kernel: uhci_root_ctrl_control type=0x23 request=01 Feb 4 14:10:30 carnivore kernel: uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=1 Feb 4 14:10:30 carnivore kernel: uhci_root_ctrl_control type=0xa3 request=00 Feb 4 14:10:30 carnivore last message repeated 2 times Feb 4 14:11:33 carnivore login: ROOT LOGIN (root) ON ttyv2 Feb 4 14:11:37 carnivore root: mark ---device plug end--- ---device unplug start--- Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0xa3 request=00 Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0x23 request=01 Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=17 Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0x23 request=01 Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=16 Feb 4 14:12:16 carnivore kernel: uhci_root_ctrl_control type=0xa3 request=00 ---device unplugged--- A more detailed debug info can be found here: http://galera.ii.pw.edu.pl/~mkoziej/usb-detailed.txt My dmesg: http://galera.ii.pw.edu.pl/~mkoziej/dmesg Best regards, Marcin Koziej
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43E4CE40.2030405>