Date: Wed, 03 Nov 2004 18:35:58 +0100 From: Palle Girgensohn <girgen@pingpong.net> To: freebsd-scsi@freebsd.org Subject: HP DLT VS80 says EOT immediately? Message-ID: <48F9F0FB4D0BB5C49845B31C@rambutan.pingpong.net>
next in thread | raw e-mail | index | archive | help
Hi!
Just bought a new DLT device, and it won't play with me:
dmesg:
sa1 at ahc2 bus 0 target 6 lun 0
sa1: <HP DLT VS80 5E40> Removable Sequential Access SCSI-2 device
sa1: 10.000MB/s transfers (10.000MHz, offset 15)
# dump 0af /dev/rsa1 /
DUMP: Date of this level 0 dump: Wed Nov 3 18:30:59 2004
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/da0s1a (/) to /dev/rsa1
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 90713 tape blocks.
DUMP: dumping (Pass III) [directories]
DUMP: End of tape detected
DUMP: Closing /dev/rsa1
DUMP: Change Volumes: Mount volume #2
DUMP: Is the new volume mounted and ready to go?: ("yes" or "no") yes
DUMP: Volume 2 begins with blocks from inode 0
DUMP: EOT detected at start of the tape!
DUMP: The ENTIRE dump is aborted.
Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): WRITE FILEMARKS. CDB: 10 0
0 0 2 0
Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): DATA PROTECT asc:27,82
Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): Vendor Specific ASCQ
Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): failed to write
terminating filemark(s)
Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): WRITE FILEMARKS. CDB: 10 0
0 0 2 0
Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): DATA PROTECT asc:27,82
Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): Vendor Specific ASCQ
Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): failed to write
terminating filemark(s)
If finds end of tape immediately? How come? This is on FreeBSD 4.10. Is it
possible that the tape device is not supported? Is there a patch for this?
/Palle
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48F9F0FB4D0BB5C49845B31C>