Date: Fri, 23 Oct 2015 00:45:58 -0500 From: Timothy Pearson <tpearson@raptorengineeringinc.com> To: freebsd-stable@freebsd.org Subject: Stable 10.1 kernel boot hang Message-ID: <5629C996.60107@raptorengineeringinc.com>
next in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi all,
We are attempting to upgrade some older FreeBSD machines to use the ASUS
KGPE-D16 mainboard, however the kernel on 10.1 hangs during boot while
enumerating PCIe devices. Linux boots with no issues.
Verbose boot log:
Type '?' for a list of commands, 'help' for more detailed help.
OK set boot_verbose="1"
OK boot
Booting...
|/-\|/-\KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=00000000bfb86000
SMAP type=02 base=00000000bfc86000 len=000000001037a000
SMAP type=02 base=00000000f0b00000 len=0000000000004000
SMAP type=02 base=00000000fec00000 len=0000000000001000
SMAP type=02 base=00000000fed00000 len=0000000000001000
SMAP type=01 base=0000000100000000 len=0000000140000000
Table 'FACP' at 0xbfca3680
Table 'SSDT' at 0xbfca3780
Table 'MCFG' at 0xbfca4630
Table 'TCPA' at 0xbfca4670
Table 'APIC' at 0xbfca46b0
APIC: Found table at 0xbfca46b0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 4: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 5: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 6: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 7: enabled
SMP: Added CPU 7 (AP)
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Wed May 13
00:53:02 CDT 2015
root@pfsense-build:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10
amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff824d2000.
Calibrating TSC clock ... TSC clock: 2000060881 Hz
CPU: AMD Opteron(tm) Processor 6129 (2000.06-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f91 Family = 0x10 Model = 0x9
Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD
Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD
Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
TSC: P-state invariant
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 9663676416 (9216 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x00000000024fc000 - 0x00000000bfc85fff, 3178799104 bytes (776074 pages)
0x0000000100000000 - 0x0000000231518fff, 5122396160 bytes (1250585 pages)
avail memory = 8263753728 (7880 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <CORE COREBOOT>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
APIC: CPU 4 has ACPI ID 4
APIC: CPU 5 has ACPI ID 5
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 7
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe001a367000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
XEN: CPU 0 has VCPU ID 0
XEN: CPU 1 has VCPU ID 1
XEN: CPU 2 has VCPU ID 2
XEN: CPU 3 has VCPU ID 3
XEN: CPU 4 has VCPU ID 4
XEN: CPU 5 has VCPU ID 5
XEN: CPU 6 has VCPU ID 6
XEN: CPU 7 has VCPU ID 7
random device not loaded; using insecure entropy
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf16b0 00024 (v02 CORE )
ACPI: XSDT 0xbfca10e0 0007C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0xbfca3680 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0xbfca1280 023F2 (v02 ASUS COREBOOT 00000001 INTL 20140114)
ACPI: FACS 0xbfca1240 00040
ACPI: SSDT 0xbfca3780 00EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
ACPI: MCFG 0xbfca4630 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: TCPA 0xbfca4670 00032 (v02 CORE COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0xbfca46b0 000A4 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: SRAT 0xbfca4760 00150 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: SLIT 0xbfca48b0 00030 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: IVRS 0xbfca48e0 000E0 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: HPET 0xbfca49c0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: SRAT 0xbfca4a00 00150 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: SLIT 0xbfca4b50 00030 (v01 CORE COREBOOT 00000000 CORE 00000000)
MADT: Found IO APIC ID 32, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 32
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 33, Interrupt 24 at 0xf8000000
ioapic1: Changing APIC ID to 33
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xffffffff81978f5c
firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff81a25b4c
firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff81a53a3c
firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff81aa6dc4
firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff81af946c
firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffffffff81e011e4
firmware: 'iwn6000g2afw' version 0: 444128 bytes loaded at
0xffffffff81b684ec
firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at
0xffffffff81bd4c7c
firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff81c4559c
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 't4fw_cfg' version 0: 3059 bytes loaded at 0xffffffff816569c4
firmware: 't4fw_cfg_uwire' version 0: 21284 bytes loaded at
0xffffffff816575b7
firmware: 't4fw' version 0: 512512 bytes loaded at 0xffffffff8165c8db
firmware: 't5fw_cfg' version 0: 3435 bytes loaded at 0xffffffff816d9b8c
firmware: 't5fw' version 0: 513024 bytes loaded at 0xffffffff816da8f7
firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff81cc3c6c
firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff81cdaf48
firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at
0xffffffff81dc4e24
firmware: 'runfw' version 0: 8192 bytes loaded at 0xffffffff81de2fe4
wlan: mac acl policy registered
firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff81d65334
firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff81d673e4
firmware: 'urtwn-rtl8188eufw' version 111: 13904 bytes loaded at
0xffffffff81de591c
firmware: 'urtwn-rtl8192cfwT' version 111: 16076 bytes loaded at
0xffffffff81de901c
firmware: 'urtwn-rtl8192cfwU' version 111: 16076 bytes loaded at
0xffffffff81decf94
firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff81d69494
firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff81d6b544
firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at
0xffffffff81cdba00
wlan: <802.11 Link Layer>
firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at
0xffffffff81cf91f0
firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at
0xffffffff81d16c90
firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at
0xffffffff81d3beb0
ipw_bss: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set
legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060b5d0, 0) error 1
ipw_ibss: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set
legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060b680, 0) error 1
ipw_monitor: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set
legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060b730, 0)
error 1
iwi_bss: You need to read the LICENSE file in
/usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set
legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80632da0, 0) error 1
iwi_ibss: You need to read the LICENSE file in
/usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set
legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80632e50, 0) error 1
iwi_monitor: You need to read the LICENSE file in
/usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set
legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80632f00, 0)
error 1
firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff8187c94c
firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xffffffff818cf06c
Hardware, Intel Secure Key RNG: RDRAND is not present
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
null: <null device, zero device>
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
nfslock: pseudo-device
crypto: <crypto core>
VESA: INT 0x10 vector 0xc000:0x3d14
VESA: information block
0000 56 45 53 41 00 03 cb 40 00 c0 00 00 00 00 22 00
0010 00 99 04 00 00 00 df 40 00 c0 f2 40 00 c0 06 41
0020 00 c0 03 00 ff ff 00 00 00 00 00 00 00 00 00 00
0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VBE mode info request: 3
VESA: 1 mode(s) found
VESA: v3.0, 256k memory, flags:0x0, mode table:0xfffffe001a3fe022 (99000022)
VESA: SeaBIOS VBE(C) 2011
VESA: SeaBIOS Developers SeaBIOS VBE Adapter Rev. 1
io: <I/O>
VMBUS: load
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hptnr: R750/DC7280 controller driver v1.0.1
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
padlock0: No ACE support.
acpi0: <CORE COREBOOT> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
cpu0: Processor \_PR_.CP00 (ACPI ID 0) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: Processor \_PR_.CP01 (ACPI ID 1) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
cpu2: Processor \_PR_.CP02 (ACPI ID 2) -> APIC ID 2
cpu2: <ACPI CPU> on acpi0
cpu3: Processor \_PR_.CP03 (ACPI ID 3) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
cpu4: Processor \_PR_.CP04 (ACPI ID 4) -> APIC ID 4
cpu4: <ACPI CPU> on acpi0
cpu5: Processor \_PR_.CP05 (ACPI ID 5) -> APIC ID 5
cpu5: <ACPI CPU> on acpi0
cpu6: Processor \_PR_.CP06 (ACPI ID 6) -> APIC ID 6
cpu6: <ACPI CPU> on acpi0
cpu7: Processor \_PR_.CP07 (ACPI ID 7) -> APIC ID 7
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff irq 0,8
on acpi0
hpet0: vendor 0x4353, rev 0x1, 5681818181818Hz, 3 timers, legacy route
hpet0: t0: irqs 0x00c0ffff (0), periodic
hpet0: t1: irqs 0x00c0ffff (0), periodic
hpet0: t2: irqs 0x00c0ffff (0), periodic
Timecounter "HPET" frequency 5681818181818 Hz -- Insufficient hz, needs
at least 1454
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x820-0x823 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0x3b0-0x3df
pcib0: decoding 4 range 0xd00-0x4fff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xe0000000-0xf0bfffff
pcib0: decoding 3 range 0xf8000000-0xf80fffff
pcib0: decoding 4 range 0-0xcf7
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x5a10, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0102, statreg=0x2018, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
MSI supports 4 messages
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=24, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=25, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
The machine just hangs at this point. ACPI cannot be disabled as the
board does not support the APIC fallback required.
Any ideas?
- --
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
http://www.raptorengineeringinc.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJWKcmUAAoJEK+E3vEXDOFbiegIAIzI6AGtkCLuvCUZGBSjU95d
xmjSD1KBWGLw7aboimkd05FjoJeesVqAs8rLXrXN5ONiLtAiSCtFsxVFFepimP1Y
pPO7xKvTUstYqMpMnmVEflU8iIvE24rAytEe9vRjTml/PhwmBxJS0akJVFMT5f+L
ySfLPuHdNLXhGlvzksYzHkEc+n+xWsFpjGw7TtATuc2goX4E7p2+XPTqHW1J3U16
W3KMboK0JjvTARaf/3q6xWn81NvOG55bBGenStaEcq1H0u6DtHuAJZVGyw+i6nbS
3eCiq6MUZ7MNVQdUG3xY7DXg7t3hn6+YmdykCD3W9uFJlGrLGHNiY7Q/c02qz6Y=
=PqdN
-----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5629C996.60107>