Date: Tue, 06 Apr 1999 22:13:07 +0900 From: Motonori Shindo <mshindo@ascend.co.jp> To: dkelly@hiwaay.net Cc: luigi@labinfo.iet.unipi.it, freebsd-multimedia@FreeBSD.ORG Subject: Re: Luigi's driver, AOpen AW37, and me. Message-ID: <19990406221307O.mshindo@ascend.co.jp> References: <199904050236.VAA00828@nospam.hiwaay.net> <19990405123305Y.mshindo@ascend.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
Let me correct one thing I have reported earlier.
From: Motonori Shindo <mshindo@ascend.co.jp>
Subject: Re: Luigi's driver, AOpen AW37, and me.
Date: Mon, 05 Apr 1999 12:33:05 +0900
> > Don't remember if I had a mic to try "cat < /dev/audio > /dev/audio".
>
> I did this but nothing happened.
'cat /dev/audio > /dev/audio' worked OK. Since the playbacked sound
was too weak, I had believed that it didn't play anything. Now I know
that it's playedback as expected.
But I'm still experiencing an unacceptable level of noise in the
sound. The .au file I used shouldn't have any format problem since
it's playbacked normally on another machine with SoundBlaster16
installed.
I appreciate if anyone who has a working CS4236 or CS4237 card gives
me the result of pnpinfo command. I would like to compare it with
mine. Here's the pnpinfo on my machine:
# pnpinfo
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CSCd925 (0x25d9630e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 4
Device Description: AW37 Pro (Resource R2.0)
Logical Device ID: CSC0000 0x0000630e #0
Device Description: WSS/SB
TAG Start DF
Good Configuration
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 - only one type (true/edge)
I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Acceptable Configuration
DMA: channel(s) 1 3
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 9 10 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x260, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 9 10 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x3c8, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x300, alignment 0x20, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: CSC0001 0x0100630e #1
Device Description: GAME
TAG Start DF
Good Configuration
I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: CSC0010 0x1000630e #2
Device Description: CTRL
I/O Range 0x120 .. 0x3a8, alignment 0x8, len 0x8
[16-bit addr]
Logical Device ID: CSC0003 0x0300630e #3
Device Description: MPU
TAG Start DF
Good Configuration
IRQ: 9 - only one type (true/edge)
I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 9 10 11 12 15 - only one type (true/edge)
I/O Range 0x330 .. 0x360, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
I/O Range 0x330 .. 0x3e0, alignment 0x8, len 0x2
[16-bit addr]
TAG End DF
End Tag
Successfully got 46 resources, 4 logical fdevs
-- card select # 0x0001
CSN CSCd925 (0x25d9630e), Serial Number 0xffffffff
Logical device #0
IO: 0x0534 0x0388 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 5 0
DMA 1 3
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0120 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #3
IO: 0x0330 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 10 0
DMA 4 4
IO range check 0x00 activate 0x01
=====================================
Motonori Shindo
Systems Engineer
Ascend Communications Japan K.K.
email: mshindo@ascend.co.jp
TEL: +81-3-5325-7306
=====================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990406221307O.mshindo>