Date: Sat, 26 Nov 2005 16:56:56 +0300 From: Yousef Raffah <yraffah@savola.com> To: freebsd-stable@freebsd.org Subject: Re: Upgrading Question Message-ID: <1133013416.824.16.camel@RedDevil.savola.com> In-Reply-To: <84dead720511260547w6b97619du35025c6051c8b0e2@mail.gmail.com> References: <1133010454.824.9.camel@RedDevil.savola.com> <84dead720511260547w6b97619du35025c6051c8b0e2@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-2nyI9YLu/8EffrSDU/vh
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
On Sat, 2005-11-26 at 19:17 +0530, Joseph Koshy wrote:
> > Trying to mount root from ufs:/dev/ad0s2a
>=20
> > I tried and tried and kept on trying with no luck, I
> > disable some modules during kernel bootup and unset some
> > variables but no luck!
>=20
> > Anyhow, one of the guys on IRC told me to build a GENERIC
> > kernel to at least boot so I built it but it panicked!
>=20
> There isn't any information in your bug report that we
> could use to help you out:
>=20
Sorry for not providing that but please find below the required
information.
> - what kind of hardware does your machine have (the
> output of dmesg would be a good start)?
This is the output of dmesg with my boot /boot/kernel.old/kernel:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-BETA5 #9: Thu Oct 20 21:36:39 AST 2005
root@RedDevil.savola.com:/usr/obj/usr/src/sys/MYKERNEL
module firewire already present!
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.01-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6d8 Stepping =3D 8
Features=3D0xafe9f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C=
MOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=3D0x180<EST,TM2>
real memory =3D 1073606656 (1023 MB)
avail memory =3D 1041719296 (993 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: Please update driver or contact the maintainer.
est: cpu_vendor GenuineIntel, msr 6120e2606000e26, bus_clk, 64
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCIBIOS PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon X300> port 0xc000-0xc0ff mem
0x90000000-0x97ffffff,0xc0000000-0xc000ffff irq 11 at device 0.0 on pci1
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
pcib2: <PCIBIOS PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <PCIBIOS PCI-PCI bridge> irq 11 at device 28.1 on pci0
pci3: <PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0x1200-0x121f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0x1220-0x123f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0x1240-0x125f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0x1260-0x127f irq 11 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4000000-0xf40003ff irq
11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci6: <PCI bus> on pcib4
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xb000b000-0xb000bfff irq 11 at
device 4.0 on pci6
iwi0: Ethernet address: 00:12:f0:63:ae:ca
cbb0: <PCI-CardBus Bridge> mem 0x13000000-0x13000fff at device 6.0 on
pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: bad Vcc request. ctrl=3D0xfff8508, status=3D0xffffffff
cbb_power: 0V
fwohci0: <1394 Open Host Controller Interface> mem
0xb0000000-0xb00007ff,0xb0004000-0xb0007fff irq 11 at device 6.2 on pci6
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:0d:a0:d1:bf:aa:e1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:08:0d:bf:aa:e1
fwe0: Ethernet address: 02:08:0d:bf:aa:e1
fwe0: if_start running deferred for Giant
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:08:0d:a0:d1:bf:aa:e1 @ 0xfffe00000000, S400,
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x3ea4c000
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 6.3 (no driver attached)
pci6: <base peripheral> at device 6.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0xe000-0xe0ff,0xe100-0xe13f mem
0xd0000000-0xd00001ff,0xd0000200-0xd00002ff irq 10 at device 30.2 on
pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcffff,0xe0000-0xe1fff,0xe5000-0xe5fff,0xeb000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <SMCf010> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
ums0: Mitsumi Electric Apple Optical USB Mouse, rev 1.10/1.08, addr 2,
iclass 3/1
ums0: 4 buttons and Z dir.
Timecounter "TSC" frequency 1862010244 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master PIO4
acd0: DVDR <MATSHITADVD-RAM UJ-831S/1.40> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-831S 1.40> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s2a
iwi0: link state changed to UP
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: bad Vcc request. ctrl=3D0x0, status=3D0x28067261
cbb_power: 0V
cbb0: bad Vcc request. ctrl=3D0x55, status=3D0x28067261
cbb_power: 1V
cbb0: bad Vcc request. ctrl=3D0x0, status=3D0x28067261
cbb_power: 0V
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
pccard0: Card has no functions!
cbb0: PC Card card activation failed
cbb0: Unsupported card type detected
cbb0: bad Vcc request. ctrl=3D0x454e5200, status=3D0x20636e69
cbb_power: 0V
cbb0: bad Vcc request. ctrl=3D0x454e5255, status=3D0x20636e69
cbb_power: 1V
cbb0: bad Vcc request. ctrl=3D0x454e5200, status=3D0x20636e69
cbb_power: 0V
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
cbb0: Unsupported card type detected
> - how did you checkout your source tree (which CVS tag
> did you use?
I used the standard-supfile which had RELENG_6
> - what is the panic message from the GENERIC kernel?
I will try to get it again as I'm in the process of rebuilding another
kernel
> - do you have any third-party kernel modules that you
> load in the kernel?
>=20
That is my /boot/loader.conf:
autoboot_delay=3D"3"
if_iwi_load=3D"YES"
wlan_wep_load=3D"YES"
#hint.apic.0.disabled=3D"1"
#hw.pci.unsupported_io=3D"1"
hw.ata.ata_dma=3D"0"
hw.ata.atapi_dma=3D"1"
#agp.ko_load=3D"YES"
#radeon.ko_load=3D"YES"
hint.apm.0.disable=3D"1"
hw.psm.synaptics.support=3D"1"
#acpi_load=3D"YES"
#linprocfs_load=3D"YES"
dcons_crom_load=3D"YES"
#splash_bmp_load=3D"YES"
#splash_pcx_load=3D"YES"
#bitmap_load=3D"YES"
#bitmap_name=3D"/boot/daemon_640.bmp"
> --
> FreeBSD Volunteer, http://people.freebsd.org/~jkoshy
--=-2nyI9YLu/8EffrSDU/vh
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)
iD8DBQBDiGmo9KbelRb+qmwRAnmBAJ4+iyQoK3BKkf/gH06lLvGXdB68WwCdGTL5
CL4mz82oZ1BRDBqAQghhdEg=
=m9U0
-----END PGP SIGNATURE-----
--=-2nyI9YLu/8EffrSDU/vh--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1133013416.824.16.camel>