Date: Tue, 6 Jun 1995 17:56:06 -0500 From: Steve Ames <steve@cioeserv.cioe.com> To: jmb@kryten.Atinc.COM Cc: freebsd-questions@freebsd.org Subject: Re: need tape help! Message-ID: <199506062256.RAA03106@cioeserv.cioe.com>
next in thread | raw e-mail | index | archive | help
> > three :) that I can't make work for anything. I can't dump, tar or get > > amanda to play ball with it. Eventually they just lock up the whole > > machine. *sigh* > > can you send dmesg output and kernel config file. what version > of the OS are you running? the amanda server MUST USE mmap() calls. > dont try this with anything prior to 2.0.X > Thanks bunches! Heres the dmesg output from the boot probe: aic0 at 0x340-0x35f irq 11 on isa aic0 waiting for scsi devices to settle (aic0:2:0): "EXABYTE EXB-82058VQANXR1 0790" type 1 removable SCSI 2 st0(aic0:2:0): Sequential-Access density code 0x0, drive empty and here is my kernel configuration file in its entirety: ----CUT HERE---- # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: GENERIC,v 1.44 1995/05/02 04:40:06 phk Exp $ # machine "i386" #cpu "I386_CPU" cpu "I486_CPU" #cpu "I586_CPU" ident CASE maxusers 15 options QUOTA #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console config kernel root on wd0 swap on wd0 and wd1 and wd2 and wd3 and sd0 and sd1 and vn0 dumps on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 controller ncr0 controller ahc0 controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr controller ahc1 at isa? bio irq ? vector ahcintr controller ahb0 at isa? bio irq ? vector ahbintr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device sd0 device st0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr controller matcd0 at isa? port ? bio device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device lpt2 at isa? port? tty device de0 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr device eg0 at isa? port 0x310 net irq 5 vector egintr device ep0 at isa? port 0x300 net irq 10 vector epintr device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log #pseudo-device sl 1 #pseudo-device ppp 0 pseudo-device pty 16 pseudo-device speaker pseudo-device gzip # Exec gzipped a.out's pseudo-device vn #pseudo-device tun 1 -----CONFIG FILE ENDS HERE----- > i have used exabytes drives with my machine at work without ANY > problems. so take heart ;) I'm really hoping to get this to work. Its becoming quite the annoyance. I really do appreciate assistance. -Steve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506062256.RAA03106>