Date: Sat, 11 Jan 2003 18:39:40 +0100 From: Sebastien Gioria <gioria@FreeBSD.ORG> To: FreeBSD-gnats-submit@FreeBSD.ORG, freebsd-bugs@FreeBSD.org Cc: imp@FreeBSD.ORG Subject: Re: conf/46977: New pccardd.conf entrey for Dlink Air 660 Wireless Card Message-ID: <20030111173940.GA34057@bushmills.intra.thorm.net> In-Reply-To: <200301111730.h0BHU1xu001348@freefall.freebsd.org> References: <20030111172633.C840EAAAC@bushmills.intra.thorm.net> <200301111730.h0BHU1xu001348@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--yrj/dFKFPuw6o+aM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
And attached is the dumpcis of this card
--
Sebastien Gioria(48.8147,2.3622) gioria@{FreeBSD,FreeBSD-FR}.ORG
French FreeBSD User Group http://www.FreeBSD-FR.ORG
FreeBSD committer http://www.FreeBSD.ORG
*-> FreeBSD + RollerBlade + Scuba Diving; What need you more ? <-*
--yrj/dFKFPuw6o+aM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dump-d-link660.dumpcis"
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 67 5a 08 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = OFF
Speed = 5.0 x 100 ns, Memory block size = 512b, 2 units
Tuple #3, code = 0x1d (Other conditions for attribute memory), length = 5
000: 01 67 5a 08 ff
(MWAIT)
Tuple #4, code = 0x15 (Version 1 info), length = 80
000: 05 00 44 2d 4c 69 6e 6b 00 44 2d 4c 69 6e 6b 20
010: 41 69 72 20 44 57 4c 2d 36 36 30 20 57 69 72 65
020: 6c 65 73 73 20 50 43 20 43 61 72 64 00 56 65 72
030: 73 69 6f 6e 20 30 31 2e 30 31 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
Version = 5.0, Manuf = [D-Link], card vers = [D-Link Air DWL-660 Wireless PC Card]
Addit. info = [Version 01.01],[]
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
000: 56 01 02 00
PCMCIA ID = 0x156, OEM ID = 0x2
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
000: 02 40 42 0f 00
Network speed: 1 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 5
000: 02 80 84 1e 00
Network speed: 2 Mb/sec
Tuple #10, code = 0x22 (Functional EXT), length = 5
000: 02 60 ec 53 00
Network speed: 5 Mb/sec
Tuple #11, code = 0x22 (Functional EXT), length = 5
000: 02 c0 d8 a7 00
Network speed: 11 Mb/sec
Tuple #12, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #13, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 05 5d 25 17 02
Network node ID: 00 05 5d 25 17 02
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 05 01
Network connector: closed connector standard
Tuple #15, code = 0x1a (Configuration map), length = 7
000: 03 01 e0 03 00 00 01
Reg len = 4, config register addr = 0x3e0, last config = 0x1
Registers: X-------
Tuple #16, code = 0x1b (Configuration entry), length = 15
000: c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Minimum operating supply voltage: 4 x 1V, ext = 0x4b
Maximum operating supply voltage: 5 x 1V, ext = 0x19
Max current average over 1 second: 3 x 100mA
Max current average over 10 ms: 3 x 100mA
Power down supply current: 1 x 10mA
Card decodes 6 address lines, limited 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: NMI IOCK BERR VEND 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
--yrj/dFKFPuw6o+aM--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030111173940.GA34057>