Date: Wed, 19 Dec 2001 16:23:02 +0100 From: Massimo Lusetti <massimo@datacode.it> To: Mike Smith <msmith@freebsd.org> Cc: freebsd-scsi@freebsd.org Subject: Re: big mly(4) logical volume Message-ID: <1008775382.3c20b0d6be383@webapps.datacode.it> In-Reply-To: <200112181954.fBIJsJO01662@mass.dis.org> References: <200112181954.fBIJsJO01662@mass.dis.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Mike Smith <msmith@freebsd.org>: > > It's normal for it to take some time to get the parity on the drives into > sync. Depending on the default rebuild rate, this can take quite a > while; 8 hours is not unimaginable. As long as it stops eventually, > you'll be fine, and it'll be usable (but slower) while the rebuild is > running. Well, infact the system was usable... but it takes 9 hours for it to complete. > > Is it normal to have this hdd always busy !? If the controlled is > > (re)building something i should notice on kernel message... right ?! > > The controller doesn't tell us that it's working on establishing parity > for a new array, AFAIR. I could probably find out if the driver went off > asking, but there's a list as long as my arm of things I want to do to > that driver... Sure, thanks for your fast reply. Thanks. Regards, Massimo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1008775382.3c20b0d6be383>