Date: Tue, 22 Aug 2006 00:12:49 -0400 From: "Carroll Kong" <me@carrollkong.com> To: <freebsd-hackers@freebsd.org> Cc: me@carrollkong.com Subject: LSI-MegaRAID 150-4 BTX Halted on 5.4, 5.5, 6.1 Message-ID: <20060822041250.2244F43D46@mx1.FreeBSD.org>
next in thread | raw e-mail | index | archive | help
I am trying to install FreeBSD on a new Intel Server SE7230NH1-E using a
PCI-X riser card on the Intel S1475 chassis, pentium D 3.2 gig dual core
proc 940.
Whenever I try to install using the CDROM for 5.4, 5.5, and 6.1... BTX halts
immediately.
The second I remove the card, the system boots up fine. In fact, I was able
to install 6.1 on one of the SATA disks on there. However, once I put the
card back, BTX Halts.
BTX Halts even if I remove all logical drives on the array (making it
completely empty and it does not show up as a disk at all in the BTX Bios).
I even disabled the card's BIOS mode, and it still halts.
Since FreeBSD 5.4 supports the LSI Megaraid 150-4, I suspect it might be the
riser card doing interesting things.
I highly doubt hardware is the issue since I was able to install CentOS
without a hitch (eek, I really don't want to use it though... unless Vmware
can run a freebsd box from it). Of course, the possibility of Linux
ignoring potentially critical errors is another possibility. :)
Just a wild guess here since I have no real hardware programming experience.
I really think it is the riser card probably doing some different alignment.
I cannot test the card without the riser (it's a weird board that needs the
riser card to 'automatically' mix to the right modes I think?).
Here is the BTX dump. It is copied verbatim from a screen shot. (hopefully
I wrote it out exactly)
int=0000000d err=00000013 efl=00030402 eip=0000554d
eax=00000204 ebx=00000000 ecx=00000001 edx=00001421
esi=00000008 edi=00000008 ebp=00000000 esp=0000040c
cs=f000 ds=3ec9 es=44b0 fs=0000 gs=0000 ss=9e4c
cs:eip=e6 e4 e4 71 c3 53 b7 00-eb 08 53 b7 01 eb 03 53
b7 02 9c fa 8a d8 8a c4-e8 e3 ff 80 ff 00 75 04
ss:esp=36 54 4a 91 00 00 96 02-b4 11 05 00 44 1d 05 00
f8 48 09 00 84 9c 00 00-00 00 00 00 b4 11 05 00
So, I CAN boot into FreeBSD 6.1 if I remove the card. If I need to
recompile something, it should be doable. Thanks in advance guys!
- Carroll Kong
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060822041250.2244F43D46>