Date: Wed, 28 Jun 2000 07:09:28 -0400 From: A Ling <aling@alum.mit.edu> To: "questions@FreeBSD.ORG" <questions@FreeBSD.ORG> Subject: Help with PPP PAP setup? Message-ID: <3959DCE8.167EB0E7@alum.mit.edu>
next in thread | raw e-mail | index | archive | help
I'm trying to setup a machine for my parents to use (they're in another state). The best-choice ISP offered me to use a test account prior to signing up, and says, "The servers consist of Cisco equipment using PAP protocol". My first effort completed LCP negotiation, but failed authentication. My understanding is that with PAP I _dont_ need a login chat script, is that right? I'm going to try manually dialing & setting up a login chat script tonight, unless I get any other ideas. Please cc me, as I'm not a regular reader of the list. Here's the log, (apologies to the Australians on the list) etc: oz# uname -a FreeBSD oz.home.org 4.0-RELEASE FreeBSD 4.0-RELEASE #0: Sun Jun 25 18:17:46 EDT 2000 root@oz.home.org:/usr/src/sys/compile/OZ i386 oz# -------- from /etc/ppp/ppp.conf ---------- default: set device /dev/cuaa0 set log Phase Chat LCP IPCP CCP tun command set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" set timeout 120 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns toast: allow user skip al bl set redial 3.3 3 ## NB following for calls from Maryland to Ohio set phone 101081114408471089 set timeout 0300 set openmode active accept pap deny chap set authname <userid> set authkey <password> ---------- from /var/log/ppp.log ----------------- Jun 27 23:37:52 oz ppp[3496]: tun0: Phase: PPP Started (interactive mode). Jun 27 23:37:55 oz ppp[3496]: tun0: Command: /dev/tty: dial Jun 27 23:37:55 oz ppp[3496]: tun0: Phase: bundle: Establish Jun 27 23:37:55 oz ppp[3496]: tun0: Phase: deflink: closed -> opening Jun 27 23:37:55 oz ppp[3496]: tun0: Phase: deflink: Connected! Jun 27 23:37:55 oz ppp[3496]: tun0: Phase: deflink: opening -> dial Jun 27 23:37:55 oz ppp[3496]: tun0: Phase: Phone: 101081114408471089 Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: deflink: Dial attempt 1 of 3 Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Send: AT^M Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Expect(5): OK Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Received: AT^M^M Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Received: OK^M Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Send: ATE1Q0^M Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Expect(5): OK Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Received: ATE1Q0^M^M Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Received: OK^M Jun 27 23:37:55 oz ppp[3496]: tun0: Chat: Send: ATDT101081114408471089^M Jun 27 23:37:57 oz ppp[3496]: tun0: Chat: Expect(40): CONNECT Jun 27 23:38:29 oz ppp[3496]: tun0: Chat: Received: ATDT101081114408471089^M^M Jun 27 23:38:29 oz ppp[3496]: tun0: Chat: Received: CONNECT 40000 V42bis^M Jun 27 23:38:29 oz ppp[3496]: tun0: Phase: deflink: dial -> carrier Jun 27 23:38:30 oz ppp[3496]: tun0: Phase: deflink: /dev/cuaa0: CD detected Jun 27 23:38:30 oz ppp[3496]: tun0: Phase: deflink: carrier -> login Jun 27 23:38:30 oz ppp[3496]: tun0: Phase: deflink: login -> lcp Jun 27 23:38:30 oz ppp[3496]: tun0: LCP: FSM: Using "deflink" as a transport Jun 27 23:38:30 oz ppp[3496]: tun0: LCP: deflink: State change Initial --> Closed Jun 27 23:38:30 oz ppp[3496]: tun0: LCP: deflink: State change Closed --> Stopped Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: deflink: LayerStart Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: ACFCOMP[2] Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: PROTOCOMP[2] Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: ACCMAP[6] 0x00000000 Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: MRU[4] 1500 Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: MAGICNUM[6] 0x752e6173 Jun 27 23:38:31 oz ppp[3496]: tun0: LCP: deflink: State change Stopped --> Req-Sent Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: deflink: RecvConfigReq(1) state = Req-Sent Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: ACCMAP[6] 0x00000000 Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: MAGICNUM[6] 0x115b04cc Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: PROTOCOMP[2] Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: ACFCOMP[2] Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: deflink: SendConfigAck(1) state = Req-Sent Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: ACCMAP[6] 0x00000000 Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: MAGICNUM[6] 0x115b04cc Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: PROTOCOMP[2] Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: ACFCOMP[2] Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Jun 27 23:38:32 oz ppp[3496]: tun0: LCP: deflink: State change Req-Sent --> Ack-Sent Jun 27 23:38:34 oz ppp[3496]: tun0: LCP: deflink: SendConfigReq(1) state = Ack-Sent Jun 27 23:38:34 oz ppp[3496]: tun0: LCP: ACFCOMP[2] Jun 27 23:38:34 oz ppp[3496]: tun0: LCP: PROTOCOMP[2] Jun 27 23:38:34 oz ppp[3496]: tun0: LCP: ACCMAP[6] 0x00000000 Jun 27 23:38:34 oz ppp[3496]: tun0: LCP: MRU[4] 1500 Jun 27 23:38:34 oz ppp[3496]: tun0: LCP: MAGICNUM[6] 0x752e6173 Jun 27 23:38:35 oz ppp[3496]: tun0: LCP: deflink: RecvConfigAck(1) state = Ack-Sent Jun 27 23:38:35 oz ppp[3496]: tun0: LCP: deflink: State change Ack-Sent --> Opened Jun 27 23:38:35 oz ppp[3496]: tun0: LCP: deflink: LayerUp Jun 27 23:38:35 oz ppp[3496]: tun0: Phase: bundle: Authenticate Jun 27 23:38:35 oz ppp[3496]: tun0: Phase: deflink: his = PAP, mine = none Jun 27 23:38:35 oz ppp[3496]: tun0: Phase: Pap Output: s1/stest ******** Jun 27 23:38:35 oz ppp[3496]: tun0: Phase: Pap Input: FAILURE (Invalid Login) Jun 27 23:38:35 oz ppp[3496]: tun0: LCP: deflink: LayerDown Jun 27 23:38:35 oz ppp[3496]: tun0: LCP: deflink: SendTerminateReq(2) state = Opened Jun 27 23:38:35 oz ppp[3496]: tun0: LCP: deflink: State change Opened --> Closing Jun 27 23:38:38 oz ppp[3496]: tun0: LCP: deflink: SendTerminateReq(2) state = Closing Jun 27 23:38:44 oz last message repeated 2 times Jun 27 23:38:45 oz ppp[3496]: tun0: Phase: deflink: Carrier lost Jun 27 23:38:45 oz ppp[3496]: tun0: LCP: deflink: LayerFinish Jun 27 23:38:45 oz ppp[3496]: tun0: LCP: deflink: State change Closing --> Initial Jun 27 23:38:45 oz ppp[3496]: tun0: Phase: deflink: Disconnected! Jun 27 23:38:45 oz ppp[3496]: tun0: Phase: deflink: lcp -> logout Jun 27 23:38:45 oz ppp[3496]: tun0: Phase: deflink: Disconnected! Jun 27 23:38:45 oz ppp[3496]: tun0: Phase: deflink: logout -> hangup Jun 27 23:38:45 oz ppp[3496]: tun0: Phase: deflink: Connect time: 50 secs: 239 octets in, 253 octets out Jun 27 23:38:45 oz ppp[3496]: tun0: Phase: total 9 bytes/sec, peak 88 bytes/sec on Tue Jun 27 23:38:45 2000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3959DCE8.167EB0E7>