Date: Sat, 26 Nov 2005 17:44:46 +0300 From: Yousef Raffah <yraffah@savola.com> To: freebsd-stable@freebsd.org Subject: Re: Upgrading Question Message-ID: <1133016286.1070.7.camel@RedDevil.savola.com> In-Reply-To: <1133013416.824.16.camel@RedDevil.savola.com> References: <1133010454.824.9.camel@RedDevil.savola.com> <84dead720511260547w6b97619du35025c6051c8b0e2@mail.gmail.com> <1133013416.824.16.camel@RedDevil.savola.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-hjFGenPIlbWJ4JRwIQzh
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
On Sat, 2005-11-26 at 16:56 +0300, Yousef Raffah wrote:
> On Sat, 2005-11-26 at 19:17 +0530, Joseph Koshy wrote:
> > > Trying to mount root from ufs:/dev/ad0s2a
> >=20
> > > I tried and tried and kept on trying with no luck, I
> > > disable some modules during kernel bootup and unset some
> > > variables but no luck!
> >=20
> > > Anyhow, one of the guys on IRC told me to build a GENERIC
> > > kernel to at least boot so I built it but it panicked!
> >=20
> > There isn't any information in your bug report that we
> > could use to help you out:
> >=20
> Sorry for not providing that but please find below the required
> information.
>=20
> > - what kind of hardware does your machine have (the
> > output of dmesg would be a good start)?
> This is the output of dmesg with my boot /boot/kernel.old/kernel:
OK I was able to boot up using my new GENERIC kernel after unload all
the drivers in the loader prompt
here is my dmesg: (sorry it is so long)
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-STABLE #2: Sat Nov 26 16:49:02 AST 2005
root@RedDevil.savola.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
Calibrating clock(s) ... i8254 clock: 1193173 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1862014843 Hz
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.01-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6d8 Stepping =3D 8
Features=3D0xafe9f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C=
MOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=3D0x180<EST,TM2>
real memory =3D 1073606656 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000003eda6fff, 1041768448 bytes (254338 pages)
avail memory =3D 1041686528 (993 MB)
bios32: Found BIOS32 Service Directory header at 0xc00e6050
bios32: Entry =3D 0xea8e0 (c00ea8e0) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xe6000+0x48f4
pnpbios: Found PnP BIOS data at 0xc00ff020
pnpbios: Entry =3D eb000:3d78 Rev =3D 1.0
pnpbios: Event flag at eb01e
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D2590808=
6)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fe840
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 5 9 10 11
embedded 0 28 A 0x61 5 9 10 11
embedded 0 28 B 0x60 5 9 10 11
embedded 0 28 C 0x62 5 9 10 11
embedded 0 28 D 0x63 5 9 10 11
embedded 0 29 A 0x6b 5 9 10 11
embedded 0 29 B 0x63 5 9 10 11
embedded 0 29 C 0x62 5 9 10 11
embedded 0 29 D 0x60 5 9 10 11
embedded 0 30 A 0x61 5 9 10 11
embedded 0 30 B 0x68 5 9 10 11
embedded 0 31 A 0x62 5 9 10 11
embedded 0 31 B 0x63 5 9 10 11
embedded 0 31 D 0x60 5 9 10 11
embedded 1 0 A 0x60 5 9 10 11
embedded 1 0 B 0x61 5 9 10 11
embedded 1 0 C 0x62 5 9 10 11
embedded 1 0 D 0x63 5 9 10 11
embedded 2 0 A 0x60 5 9 10 11
embedded 2 0 B 0x61 5 9 10 11
embedded 2 0 C 0x62 5 9 10 11
embedded 2 0 D 0x63 5 9 10 11
embedded 3 0 A 0x61 5 9 10 11
embedded 3 0 B 0x62 5 9 10 11
embedded 3 0 C 0x63 5 9 10 11
embedded 3 0 D 0x60 5 9 10 11
embedded 4 0 A 0x62 5 9 10 11
embedded 4 0 B 0x63 5 9 10 11
embedded 4 0 C 0x60 5 9 10 11
embedded 4 0 D 0x61 5 9 10 11
embedded 5 0 A 0x63 5 9 10 11
embedded 5 0 B 0x60 5 9 10 11
embedded 5 0 C 0x61 5 9 10 11
embedded 5 0 D 0x62 5 9 10 11
embedded 6 4 A 0x60 5 9 10 11
embedded 6 4 B 0x61 5 9 10 11
embedded 6 6 A 0x62 5 9 10 11
embedded 6 6 B 0x63 5 9 10 11
embedded 6 6 C 0x6a 5 9 10 11
embedded 6 6 D 0x68 5 9 10 11
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 10 5 9 10 11
0x61 255 N 8 5 9 10 11
0x62 255 N 9 5 9 10 11
0x63 255 N 9 5 9 10 11
0x6b 255 N 1 5 9 10 11
0x68 255 N 2 5 9 10 11
0x6a 255 N 1 5 9 10 11
$PIR: Found matching pin for 0.1.INTA at func 0: 11
$PIR: Found matching pin for 0.28.INTA at func 0: 10
$PIR: Found matching pin for 0.28.INTB at func 1: 11
$PIR: Found matching pin for 0.29.INTA at func 0: 11
$PIR: Found matching pin for 0.29.INTB at func 1: 11
$PIR: Found matching pin for 0.29.INTC at func 2: 11
$PIR: Found matching pin for 0.29.INTD at func 3: 11
$PIR: Found matching pin for 0.30.INTA at func 2: 10
$PIR: Found matching pin for 0.30.INTB at func 3: 5
$PIR: Found matching pin for 0.31.INTB at func 2: 255
$PIR: Found matching pin for 1.0.INTA at func 0: 11
$PIR: Found matching pin for 2.0.INTA at func 0: 11
$PIR: Found matching pin for 6.4.INTA at func 0: 11
$PIR: Found matching pin for 6.6.INTA at func 0: 255
$PIR: Found matching pin for 6.6.INTA at func 4: 11
$PIR: Found matching pin for 6.6.INTC at func 2: 11
$PIR: Found matching pin for 6.6.INTD at func 3: 5
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 11 Y 10 5 9 10 11
0x61 10 Y 8 5 9 10 11
0x62 11 Y 9 5 9 10 11
0x63 11 Y 9 5 9 10 11
0x6b 11 Y 1 5 9 10 11
0x68 5 Y 2 5 9 10 11
0x6a 11 Y 1 5 9 10 11
$PIR: IRQs used by BIOS: 5 10 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 2 0 0 0 0 8 30 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=3D0
found-> vendor=3D0x8086, dev=3D0x2590, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2591, revid=3D0x03
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D4 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x00 (0 n=
s)
intpin=3Da, irq=3D11
$PIR: 0:1 INTA routed to irq 11
found-> vendor=3D0x8086, dev=3D0x2660, revid=3D0x04
bus=3D0, slot=3D28, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D4 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns=
)
intpin=3Da, irq=3D10
$PIR: 0:28 INTA routed to irq 10
found-> vendor=3D0x8086, dev=3D0x2662, revid=3D0x04
bus=3D0, slot=3D28, func=3D1
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D4 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns=
)
intpin=3Db, irq=3D11
$PIR: 0:28 INTB routed to irq 11
found-> vendor=3D0x8086, dev=3D0x2658, revid=3D0x04
bus=3D0, slot=3D29, func=3D0
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
map[20]: type 4, range 32, base 00001200, size 5, enabled
$PIR: 0:29 INTA routed to irq 11
found-> vendor=3D0x8086, dev=3D0x2659, revid=3D0x04
bus=3D0, slot=3D29, func=3D1
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
map[20]: type 4, range 32, base 00001220, size 5, enabled
$PIR: 0:29 INTB routed to irq 11
found-> vendor=3D0x8086, dev=3D0x265a, revid=3D0x04
bus=3D0, slot=3D29, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D11
map[20]: type 4, range 32, base 00001240, size 5, enabled
$PIR: 0:29 INTC routed to irq 11
found-> vendor=3D0x8086, dev=3D0x265b, revid=3D0x04
bus=3D0, slot=3D29, func=3D3
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
map[20]: type 4, ran class=3D0c-03-20, hdrtype=3D0x00,
mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base f4000000, size 10, memory
disabled
$PIR: 0:29 INTA routed to irq 11
found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0xd4
bus=3D0, slot=3D30, func=3D0
class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 n=
s)
found-> vendor=3D0x8086, dev=3D0x266e, revid=3D0x04
bus=3D0, slot=3D30, func=3D2
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 4, range 32, base 0000e100, size 6, enabled
map[18]: type 1, range 32, base d0000000, size 9, enabled
map[1c]: type 1, range 32, base d0000200, size 8, enabled
$PIR: 0:30 INTA routed to irq 10
found-> vendor=3D0x8086, dev=3D0x266d, revid=3D0x04
bus=3D0, slot=3D30, func=3D3
class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e200, size 8, enabled
map[14]: type 4, range 32, base 0000e300, size 7, enabled
$PIR: 0:30 INTB routed to irq 5
found-> vendor=3D0x8086, dev=3D0x2641, revid=3D0x04
bus=3D0, slot=3D31, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0200, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x2653, revid=3D0x04
bus=3D0, slot=3D31, func=3D2
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x02b8, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001100, size 4, enabled
pcib1: <PCIBIOS PCI-PCI bridge> irq 11 at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xdfff
pcib1: memory decode 0xc0000000-0xcfffffff
pcib1: prefetched decode 0x90000000-0x9fffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
found-> vendor=3D0x1002, dev=3D0x5460, revid=3D0x00
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D4 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 32, base 90000000, size 27, enabled
pcib1: (null) requested memory range 0x90000000-0x97ffffff: good
map[14]: type 4, range 32, base 0000c000, size 8, enabled
pcib1: (null) requested I/O range 0xc000-0xc0ff: in range
map[18]: type 1, range 32, base c0000000, size 16, enabled
pcib1: (null) requested memory range 0xc0000000-0xc000ffff: good
$PIR: 1:0 INTA routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> irq 10 at device 28.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xbfff
pcib2: memory decode 0xbc000000-0xbfffffff
pcib2: prefetched decode 0x8c000000-0x8fffffff
pci2: <PCI bus> on pcib2
pci2: physical bus=3D2
found-> vendor=3D0x11ab, dev=3D0x4362, revid=3D0x15
bus=3D2, slot=3D0, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D4 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 1, range 64, base bc000000, size 14, enabled
pcib2: (null) requested memory range 0xbc000000-0xbc003fff: good
map[18]: type 4, range 32, base 0000a000, size 8, enabled
pcib2: (null) requested I/O range 0xa000-0xa0ff: in range
$PIR: 2:0 INTA routed to irq 11
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <PCIBIOS PCI-PCI bridge> irq 11 at device 28.1 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x8000-0x9fff
pcib3: memory decode 0xb8000000-0xbbffffff
pcib3: prefetched decode 0x88000000-0x8bffffff
pci3: <PCI bus> on pcib3
pci3: physical bus=3D3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0x1200-0x121f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1200
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0x1220-0x123f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1220
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0x1240-0x125f irq 11 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1240
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0x1260-0x127f irq 11 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1260
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4000000-0xf40003ff irq
11 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4000000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 6
pcib4: subordinate bus 6
pcib4: I/O decode 0x6000-0x7fff
pcib4: memory decode 0xb0000000-0xb7ffffff
pcib4: prefetched decode 0x80000000-0x87ffffff
pcib4: Subtractively decoded bridge.
pci6: <PCI bus> on pcib4
pci6: physical bus=3D6
found-> vendor=3D0x8086, dev=3D0x4220, revid=3D0x05
bus=3D6, slot=3D4, func=3D0
class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x18 (6=
000
ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base b000b000, size 12, enabled
pcib4: (null) requested memory range 0xb000b000-0xb000bfff: good
$PIR: 6:4 INTA routed to irq 11
found-> vendor=3D0x104c, dev=3D0x8031, revid=3D0x00
bus=3D6, slot=3D6, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03
(750 ns)
intpin=3Da, irq=3D255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 13000000, size 12, enabled
pcib4: (null) requested memory range 0x13000000-0x13000fff: good
found-> vendor=3D0x104c, dev=3D0x8032, revid=3D0x00
bus=3D6, slot=3D6, func=3D2
class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D4 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1=
000
ns)
intpin=3Dc, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0000000, size 11, enabled
pcib4: (null) requested memory range 0xb0000000-0xb00007ff: good
map[14]: type 1, range 32, base b0004000, size 14, enabled
pcib4: (null) requested memory range 0xb0004000-0xb0007fff: good
$PIR: 6:6 INTC routed to irq 11
found-> vendor=3D0x104c, dev=3D0x8033, revid=3D0x00
bus=3D6, slot=3D6, func=3D3
class=3D01-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D4 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x04
(1000 ns)
intpin=3Dd, irq=3D5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0008000, size 13, enabled
pcib4: (null) requested memory range 0xb0008000-0xb0009fff: good
$PIR: 6:6 INTD routed to irq 5
found-> vendor=3D0x104c, dev=3D0x8034, revid=3D0x00
bus=3D6, slot=3D6, func=3D4
class=3D08-05-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D4 (dwords)
lattimer=3D0x80 (3840 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x04
(1000 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b000a000, size 8, enabled
pcib4: (null) requested memory range 0xb000a000-0xb000a0ff: good
map[14]: type 1, range 32, base b000a100, size 8, enabled
pcib4: (null) requested memory range 0xb000a100-0xb000a1ff: good
map[18]: type 1, range 32, base b000a200, size 8, enabled
pcib4: (null) requested memory range 0xb000a200-0xb000a2ff: good
$PIR: 6:6 INTA routed to irq 11
pci6: <network> at device 4.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> mem 0x13000000-0x13000fff at device 6.0 on
pci6
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x13000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
$PIR: 6:6 INTA routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x8031104c 0x02100007 0x06070000 0x00824000=20
0x10: 0x13000000 0x020000a0 0x40080706 0xfffff000=20
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc=20
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b=20
0x40: 0xff101179 0x00000001 0x00000000 0x00000000=20
0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x80: 0x08409060 0x02930019 0x000f0002 0x01aa1b22=20
0x90: 0x606600c0 0x00000000 0x00000000 0x00000000=20
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20
fwohci0: vendor=3D104c, dev=3D8032
fwohci0: vendor=3D104c, dev=3D8032
fwohci0: <1394 Open Host Controller Interface> mem
0xb0000000-0xb00007ff,0xb0004000-0xb0007fff irq 11 at device 6.2 on pci6
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0000000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:0d:a0:d1:bf:aa:e1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:08:0d:bf:aa:e1
fwe0: bpf attached
fwe0: Ethernet address: 02:08:0d:bf:aa:e1
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc000ffc0, gen=3D2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci6: <mass storage> at device 6.3 (no driver attached)
pci6: <base peripheral> at device 6.4 (no driver attached)
pci0: <multimedia, audio> at device 30.2 (no driver attached)
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1100
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D80 ostat1=3D80
ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata1: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata1: [MPSAFE]
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 16 devices, largest 230 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x3ffeffff,
size=3D0x3fef0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=3D0x20000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=3D0x80000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0
PNP0c02: adding io range 0x680-0x6ff, size=3D0x80, align=3D0
PNP0c02: adding io range 0x92-0x92, size=3D0x1, align=3D0
PNP0c02: adding io range 0x62-0x62, size=3D0x1, align=3D0
PNP0c02: adding io range 0x66-0x66, size=3D0x1, align=3D0
PNP0c02: adding io range 0x2e-0x2f, size=3D0x2, align=3D0
PNP0c02: adding io range 0xb2-0xb3, size=3D0x2, align=3D0
PNP0c02: adding io range 0x1000-0x107f, size=3D0x80, align=3D0
PNP0c02: adding io range 0x1300-0x133f, size=3D0x40, align=3D0
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=3D0x10, align=3D0
pnpbios: handle 2 device ID PNP0c04 (040cd041)
PNP0200: adding io range 0-0x1f, size=3D0x20, align=3D0
PNP0200: adding io range 0x80-0x8f, size=3D0x10, align=3D0
PNP0200: adding io range 0xc0-0xdf, size=3D0x20, align=3D0
PNP0200: adding dma mask 0x10
pnpbios: handle 4 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=3D0x20, align=3D0
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=3D0x10, align=3D0
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=3D0x1, align=3D0
PNP0303: adding io range 0x64-0x64, size=3D0x1, align=3D0
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=3D0x1, align=3D0
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=3D0x80000
pnpbios: handle 11 device ID INT0800 (0008d425)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0e03: adding io range 0x3e0-0x3e3, size=3D0x4, align=3D0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
SMCf010: adding irq mask 0x8
SMCf010: adding io range 0x2f8-0x2ff, size=3D0x8, align=3D0
SMCf010: adding io range 0x110-0x117, size=3D0x8, align=3D0
SMCf010: adding dma mask 0x2
pnpbios: handle 16 device ID SMCf010 (10f0a34d)
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=3D0x8, align=3D0
PNP0401: adding io range 0x778-0x77b, size=3D0x4, align=3D0
PNP0401: adding dma mask 0x8
pnpbios: handle 17 device ID PNP0401 (0104d041)
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcffff,0xe0000-0xe1fff,0xe5000-0xe5fff,0xeb000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x801 0x809 0x801 0x801
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff,0x100000-0x3ffeffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb00000-0xffb7ffff on
isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e3 on isa0
unknown: <SMCf010> can't assign resources (port)
unknown: <SMCf010> at port 0x2f8-0x2ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
ums0: Mitsumi Electric Apple Optical USB Mouse, rev 1.10/1.08, addr 2,
iclass 3/1
ums0: 4 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1862014843 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire
ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master PIO4
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth
queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire
acd0: <MATSHITADVD-RAM UJ-831S/1.40> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xc5125ac8, 0) error 19
So what am I advised to do now?
--=-hjFGenPIlbWJ4JRwIQzh
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)
iD8DBQBDiHTe9KbelRb+qmwRAtyVAKC6onlQJ942igDCs9h8W6Uvh08PVgCgmhQ4
HB27/G4SZbQklNd91L/N0Qo=
=IDx5
-----END PGP SIGNATURE-----
--=-hjFGenPIlbWJ4JRwIQzh--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1133016286.1070.7.camel>