Date: Tue, 8 Jul 2003 21:28:24 +0200 From: Wilko Bulte <wkb@freebie.xs4all.nl> To: Tomas Hodan <tomas@hodan.sk> Cc: freebsd-scsi@freebsd.org Subject: Re: ql2200 Message-ID: <20030708192824.GA64643@freebie.xs4all.nl> In-Reply-To: <000001c34566$d6d88280$3564f892@emea.ads.autodesk.com> References: <000001c34566$d6d88280$3564f892@emea.ads.autodesk.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jul 08, 2003 at 04:37:27PM +0100, Tomas Hodan wrote: Matt (who wrote the isp driver) will ask you if you loaded ispfw.ko (the firmware for the cards the isp driver supports). Wilko > > I have problem to get running qlogic 2200 in current. I have tried > diffenet qlogic boards (but all was ql2200), different qlogic bios, disk > arrays, different freebsd version, different pci slots. > > with current version (cvs and build) from > Jul 7 10:11:48 pica kernel: FreeBSD 5.1-CURRENT #0: Fri Jul 4 14:03:50 > GMT 2003 > > I'm getting this error : > > Jul 7 10:11:49 pica kernel: isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> > port 0x9800-0x98ff mem 0xf2003000-0xf2 > 003fff irq 11 at device 8.0 on pci3 > Jul 7 10:11:49 pica kernel: isp0: Polled Mailbox Command (0x2) Timeout > Jul 7 10:11:49 pica kernel: device_probe_and_attach: isp0 attach > returned 6 > > sometimes the kernel stays in this state forever, sometime after > sometime it finish booting. > I had twice succesfull boot with the qlogic board and I was able to use > the disks connected to the board. after next reboot it stops to work. > > anyone any ides? > > thanks > tomas > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" ---end of quoted text--- -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030708192824.GA64643>