Date: Sat, 30 Dec 2006 15:06:47 -0800 From: Jonathan Dama <jd@ugcs.caltech.edu> To: freebsd-questions@freebsd.org Subject: Missing Drives off of a Promise SATA300 TX4 controller Message-ID: <20061230230647.GA23024@barf.ugcs.caltech.edu>
next in thread | raw e-mail | index | archive | help
I've got two WD drives attached to a promise SATA300 TX4 controller.
The controller appears to be detected and reports the drives during
a verbose boot, but no devices are ever created and atacontrol list
fails to report them:
atapci0: <Promise PDC40718 SATA300 controller> port 0xc400-0xc47f,0xc800-0xc8ff
mem 0xde121000-0xde121fff,0xde100000-0xde11ffff irq 12 at device 11.0 on pci1
pci1: child atapci0 requested type 4 for rid 0x20, but the BAR says it is an mem
io
atapci0: [MPSAFE]
atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xde100000
atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xde121000
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect ready time=0ms
ata4: sata_connect devices=0x1<ATA_MASTER>
ata4: [MPSAFE]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: [MPSAFE]
atacontrol list
ATA channel 0:
Master: ad0 <WDC WD200BB-00AUA1/18.20D18> ATA/ATAPI revision 5
Slave: no device present
ATA channel 1:
Master: no device present
Slave: no device present
ATA channel 2:
Master: no device present
Slave: no device present
ATA channel 3:
Master: no device present
Slave: no device present
ATA channel 4:
Master: no device present
Slave: no device present
ATA channel 5:
Master: no device present
Slave: no device present
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061230230647.GA23024>