Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 03 Dec 2003 09:13:57 -0500
From:      "Michael E. Mercer" <mmercer@nc.rr.com>
To:        fbsd_user@a1poweruser.com
Cc:        freebsd-questions@freebsd.org
Subject:   RE: SCSI Disk not found
Message-ID:  <1070460836.1333.20.camel@dual.mmercer.com>
In-Reply-To: <MIEPLLIBMLEEABPDBIEGGEFJEPAA.fbsd_user@a1poweruser.com>
References:  <MIEPLLIBMLEEABPDBIEGGEFJEPAA.fbsd_user@a1poweruser.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello,

I wish it were that easy... I really meant that FreeBSD does NOT
see it at all. I have tried to mount it myself, but it tells 
me that the device is not configured.

The SCSI hard drive appears in the system BIOS, and when the machine
first boots up, but it is gone everywhere else.

Any ideas?

Michael

On Wed, 2003-12-03 at 09:09, fbsd_user wrote:
> You have to add an line to the /etc/fstab file for the second HD.
> You can mount it as an msdos HD or you can use FBSD to fdisk, label,
> and format it to FBSD file system.  It's up to you and how you want
> to use it.
> 
> -----Original Message-----
> From: owner-freebsd-questions@freebsd.org
> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Michael E.
> Mercer
> Sent: Tuesday, December 02, 2003 11:38 PM
> To: freebsd-questions@freebsd.org
> Subject: SCSI Disk not found
> 
> Hello peoples,
> 
> I was given a Compaq Proliant 800 machine...its a pentium pro
> 200 MHz. I got 4.9-Stable installed and everything is running
> smooth.
> 
> However, I noticed that is does indeed have two scsi disks,
> but freebsd only finds one.
> 
> Attached is the dmesg... notice the sym0 and sym1.
> Does this supposed to tell me anything?
> 
> Thanks
> Michael E Mercer
> 
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
>         The Regents of the University of California. All rights
> reserved.
> FreeBSD 4.9-STABLE #0: Tue Dec  2 21:45:22 EST 2003
>     root@slow.nc.rr.com:/usr/src/sys/compile/slow_4_9
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: Pentium Pro (199.43-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
> 
> Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
> CMOV>
> real memory  = 301989888 (294912K bytes)
> avail memory = 288219136 (281464K bytes)
> Preloaded elf kernel "kernel" at 0xc0491000.
> Preloaded userconfig_script "/boot/kernel.conf" at 0xc049109c.
> ccd0-3: Concatenated disk drivers
> VESA: v1.2, 1024k memory, flags:0x0, mode table:0xc03f8994 (1000014)
> VESA: STB COMPAQ 5440
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <IBM 82351 PCI-PCI bridge> at device 8.0 on pci0
> pci1: <PCI bus> on pcib1
> sym0: <875> port 0x7000-0x70ff mem
> 0x40100000-0x40100fff,0x40102000-0x401020ff irq 5 at device 4.0 on
> pci1
> sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
> sym1: <875> port 0x7400-0x74ff mem
> 0x40101000-0x40101fff,0x40102100-0x401021ff irq 5 at device 8.0 on
> pci1
> sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
> pci1: <Cirrus Logic GD5430 SVGA controller> at 9.0
> tl0: <Compaq NetFlex-3/P Integrated> port 0x6000-0x600f mem
> 0x40000000-0x4000000f irq 9 at device 16.0 on pci0
> tl0: Ethernet address: 00:80:5f:35:d8:6d
> miibus0: <MII bus> on tl0
> tlphy0: <ThunderLAN 10baseT media interface> on miibus0
> tlphy0:  10base2/BNC, 10base5/AUI, 10baseT, 10baseT-FDX, auto
> isab0: <Intel 82371SB PCI to ISA bridge> at device 20.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX3 ATA controller> port 0xf100-0xf10f at device
> 20.1
> on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> eisa0: <EISA bus> on motherboard
> mainboard0: <CPQ0579 (System Board)> on eisa0 slot 0
> orm0: <Option ROMs> at iomem
> 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0
> pmtimer0 on isa0
> pca0 at port 0x40 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> sc0: <System console> on isa0
> sc0: VGA <16 virtual consoles, flags=0x200>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: cannot reserve I/O port range
> IPsec: Initialized Security Association Processing.
> ncp_load: [210-213]
> ad1: 8207MB <ST38641A> [16676/16/63] at ata0-slave WDMA2
> acd0: CDROM <HITACHI CDR-7930> at ata0-master PIO3
> Waiting 15 seconds for SCSI devices to settle
> Mounting root from ufs:/dev/da0s1a
> da0 at sym1 bus 0 target 0 lun 0
> da0: <COMPAQ ST34371W 0682> Fixed Direct Access SCSI-2 device
> da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged
> Queueing
> Enabled
> da0: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C)
> 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1070460836.1333.20.camel>