Date: Mon, 24 Jun 2002 17:49:31 +0300 From: Tomi Vainio - Sun Finland - <Tomi.Vainio@Sun.COM> To: Jake Burkholder <jake@locore.ca> Cc: freebsd-sparc@FreeBSD.ORG Subject: new snapshot available Message-ID: <15639.12667.859913.392075@gargle.gargle.HOWL> In-Reply-To: <20020624043850.J19831@locore.ca> References: <20020624043850.J19831@locore.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Jake Burkholder writes:
>
> I've uploaded a new snapshot. I encourage everyone to install this
> from scratch, and blow away your old system. The reason is that we
> want to get rid of all the old toolchain cruft that you may still
> have, from before the gcc3.1 import. Also, for various reasons there
> can be difficulties building world from the older -current snapshots.
>
Here is next one from E220R
Booting [/boot/kernel/kernel]...
nothing to autoload yet.
jumping to kernel entry at 0xc0038000.
Copstray vector interrupt 2029
yright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #58: Mon Jun 24 08:36:33 GMT 2002
jake@u60.locore.ca:/usr/current/src/sys/sparc64/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0462000.
Timecounter "tick" frequency 360007078 Hz
cpu0: Sun Microsystems UltraSparc-II Processor (360.01 MHZ CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: SUNW,psycho: impl 0, version 4: ign 7c0 initialializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
device 0/1/0: latency timer 0 -> 82
pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 128)
device 0/1/1: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0)
device 0/3/0: latency timer 0 -> 140
pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0)
device 0/3/1: latency timer 0 -> 140
pcib0: ofw_pci_init: mapping intr for 0/3/1 to 38 (preset was 0)
PCI-PCI bridge at 0/5/0: setting bus #s to 0/1/1
pcib0: ofw_pci_init: descending to subordinate PCI bus
device 1/0/0: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/0/0 to 28 (preset was 0)
device 1/0/1: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/0/1 to 29 (preset was 0)
device 1/1/0: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/1/0 to 28 (preset was 0)
device 1/1/1: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/1/1 to 29 (preset was 0)
device 1/2/0: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/2/0 to 28 (preset was 0)
device 1/2/1: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/2/1 to 29 (preset was 0)
device 1/3/0: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/3/0 to 28 (preset was 0)
device 1/3/1: latency timer 0 -> 82
pcib0: ofw_pci_init: mapping intr for 1/3/1 to 29 (preset was 0)
pci0: <PCI bus> on pcib0
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80b8df28
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x10100000-0x10107fff irq 33 at device 1.1 on pci0
hme0: Ethernet address: 08:00:20:b8:df:28
miibus0: <MII bus> on hme0
qsphy0: <QS6612 10/100 media interface> on miibus0
qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0x1000-0x10ff mem 0x1010a000-0x1010afff,0x10108000-0x101080ff irq 32 at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x1400-0x14ff mem 0x1010e000-0x1010efff,0x1010c000-0x1010c0ff irq 38 at device 3.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib1: <PCI-PCI bridge> at device 5.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <bridge, PCI-unknown> at device 0.0 (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem 0x4000000-0x4007fff irq 29 at device 0.1 on pci1
hme1: Ethernet address: 08:00:20:b8:df:28
miibus1: <MII bus> on hme1
qsphy1: <QS6612 10/100 media interface> on miibus1
qsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <bridge, PCI-unknown> at device 1.0 (no driver attached)
hme2: <Sun HME 10/100 Ethernet> mem 0x8000000-0x8007fff irq 29 at device 1.1 on pci1
hme2: Ethernet address: 08:00:20:b8:df:28
miibus2: <MII bus> on hme2
qsphy2: <QS6612 10/100 media interface> on miibus2
qsphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <bridge, PCI-unknown> at device 2.0 (no driver attached)
hme3: <Sun HME 10/100 Ethernet> mem 0xc000000-0xc007fff irq 29 at device 2.1 on pci1
hme3: Ethernet address: 08:00:20:b8:df:28
miibus3: <MII bus> on hme3
qsphy3: <QS6612 10/100 media interface> on miibus3
qsphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <bridge, PCI-unknown> at device 3.0 (no driver attached)
hme4: <Sun HME 10/100 Ethernet> mem 0x10000000-0x10007fff irq 29 at device 3.1 on pci1
hme4: Ethernet address: 08:00:20:b8:df:28
miibus4: <MII bus> on hme4
qsphy4: <QS6612 10/100 media interface> on miibus4
qsphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <U2P UPA-PCI bridge> on nexus0
pcib2: SUNW,psycho: impl 0, version 4: ign 7c0 PCI-PCI bridge at 2/1/0: setting bus #s to 2/3/3
pcib2: ofw_pci_init: descending to subordinate PCI bus
device 3/4/0: latency timer 0 -> 528
pcib2: ofw_pci_init: mapping intr for 3/4/0 to 0 (preset was 255)
pcib2: ofw_pci_init: mapping intr for 3/5/0 to 0 (preset was 0)
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 1.0 on pci2
pci3: <PCI bus> on pcib3
gem0: <Sun GEM Gigabit Ethernet Adaptor> mem 0x200000-0x3fffff irq 0 at device 4.0 on pci3
gem0: phy probe failed: 6
gem0: could not be configured
panic: trap: fast data access mmu miss
cpuid = 0; Debugger("panic")
Stopped at Debugger+0x1c: ta %xcc, 1
db> c
Uptime: 1s
panic: Assertion mtx_unowned(m) failed at ../../../kern/kern_mutex.c:911
cpuid = 0; Debugger("panic")
Stopped at Debugger+0x1c: ta %xcc, 1
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15639.12667.859913.392075>