Date: Wed, 21 Jun 2000 09:19:53 +0100 From: Brian Somers <brian@Awfulhak.org> To: Ian J Greely <Ian@tirnanog.org> Cc: freebsd-mobile@freebsd.org, brian@hak.lan.Awfulhak.org Subject: Re: PCCARD Corega FastEther PCC-TX card Message-ID: <200006210819.JAA01585@hak.lan.Awfulhak.org> In-Reply-To: Message from Ian J Greely <Ian@tirnanog.org> of "Wed, 21 Jun 2000 02:10:56 BST." <6g50lsgtcph39p15jbcrl7o9105v6f2ruu@4ax.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> I have this Corega FastEther card that, I was told, is a DLINK clone.
>
> I've managed to get this to "work" with a config of
>
> config auto "ed0" 11 0x0a
>
> However I'm having two problems with this. When the card is
> initialised by the PCCARD code the Ethernet address is set to all a's
> which does not match the code the card generates when booted under
> Windows on this machine. I can't set the config manually (for some
> obscure reason) so I need to be able to use DHCP for this
> configuration...
>
> I am also seeing a LOT of memory corruption errors on the NIC.
>
> Has anyone managed to get this working correctly?
[jumps up and down with hand in air]
I have, I have :-)
I'll meet you for lunch some day and try your card in my machine. If
it works, this'll narrow things down to it either being because
you're running 4.0 (or is it -stable) or because there's something
funny about your controller.
The only other suggestion I can make (before Warner gets in there) is
to change the IRQ to (say) 10 or 3 and see if that helps.
> regards,
> Ian
--
Brian <brian@Awfulhak.org> <brian@[uk.]FreeBSD.org>
<http://www.Awfulhak.org>; <brian@[uk.]OpenBSD.org>
Don't _EVER_ lose your sense of humour !
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006210819.JAA01585>