Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 14 Sep 2017 10:06:14 +0000
From:      bugzilla-noreply@freebsd.org
To:        freebsd-net@FreeBSD.org
Subject:   [Bug 217606] Bridge stops working after some days
Message-ID:  <bug-217606-2472-dlTHXfySsr@https.bugs.freebsd.org/bugzilla/>
In-Reply-To: <bug-217606-2472@https.bugs.freebsd.org/bugzilla/>
References:  <bug-217606-2472@https.bugs.freebsd.org/bugzilla/>

next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D217606

--- Comment #20 from Fabian Keil <fk@fabiankeil.de> ---
Created attachment 186372
  --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=3D186372&action=
=3Dedit
ElectroBSD r323013-16c8587cb1b5 dmesg on HP Proliant

TL;DR: I'm attaching a dmesg output as requested but as it looks
like the problems are unrelated the system differences are
probably irrelevant. I currently don't use ix devices.

As mentioned in comment #13 it's not obvious to me that
Aiko's issue is uma related and I mainly mentioned the
patches as the symptoms look somewhat similar and no
other suggestions were made at the time.

The fact that the uma patches didn't help on the punkt.de
system(s) seems to indicate that it's another issue as well
(but maybe the same as Aiko's).

On my systems the uma regression resulted in established
tcp connections getting terminated after a while. It could
take days for the problem to occur so I've mostly noticed
it with ssh connections. Terminated connections could be
reestablished without restarting any interfaces and the
problem didn't affect all connections at the same time
either.

I've created the if_bridge patches after noticing that
ssh connections on a bhyve host to the bhyve vms got
terminated a couple of times in a similar fashion.

At the time the bhyve host and vms were running ElectroBSD
based on FreeBSD stable/11 from March 2017 and already
contained the other tcp regression fixes.

The bhyve host is a HP DL120 G6 using a bridge1 between
tap devices for vms with access to the Internet and bridge0
between tap devices from vms without access to the Internet.
pf is being used to nat on bge0 to bridge1.

After applying the if_bridge patches the local ssh connections
to the bhyve vms stayed up so I haven't looked into this
any further. I also didn't verify that removing the if_bridge
patches reintroduces the problem again to confirm that there's
indeed a causation (and the problem wasn't fixed by syncing with
stable/11).

--=20
You are receiving this mail because:
You are the assignee for the bug.=



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-217606-2472-dlTHXfySsr>