Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 30 Apr 2009 03:46:23 GMT
From:      Ata Asgari <asgari@gmail.com>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   i386/134105: Realtek 8110SC with device ID 0x814910ec is not detected by FreeBSD 7.1. Most of New Mini-ITX boards are based on this chip.
Message-ID:  <200904300346.n3U3kNxZ051833@www.freebsd.org>
Resent-Message-ID: <200904300350.n3U3o1jT008282@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         134105
>Category:       i386
>Synopsis:       Realtek 8110SC with device ID 0x814910ec is not detected by FreeBSD 7.1. Most of New Mini-ITX boards are based on this chip.
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Apr 30 03:50:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Ata Asgari
>Release:        7.1
>Organization:
Blue Pyramid LLC
>Environment:
FreeBSD pyrawall.pyra.com 7.1-RELEASE-p5 FreeBSD 7.1-RELEASE-p5 #0: Wed Apr 22 15:35:36 EDT 2009
>Description:
Realtek 8110SC with device ID 0x814910ec is not detected by FreeBSD 7.1. Most of New Mini-ITX boards are based on this chip.

Here is a photo of the chips : Here is a photo of the daughterboard : http://i663.photobucket.com/albums/uu359/asgari/SANY0321-Low.jpg

pciconf -lv output : 

hostb0@pci0:0:0:0:      class=0x060000 card=0x27708086 chip=0x27708086 rev=0x02 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:     class=0x030000 card=0x27728086 chip=0x27728086 rev=0x02 hdr=0x00
    class      = display
    subclass   = VGA
none0@pci0:0:27:0:      class=0x040300 card=0xa62516f3 chip=0x27d88086 rev=0x01 hdr=0x00
    class      = multimedia
pcib1@pci0:0:28:0:      class=0x060400 card=0x27d08086 chip=0x27d08086 rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:      class=0x0c0300 card=0x27c88086 chip=0x27c88086 rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:      class=0x0c0300 card=0x27c98086 chip=0x27c98086 rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2:      class=0x0c0300 card=0x27ca8086 chip=0x27ca8086 rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:3:      class=0x0c0300 card=0x27cb8086 chip=0x27cb8086 rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:      class=0x0c0320 card=0x27cc8086 chip=0x27cc8086 rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = USB
pcib2@pci0:0:30:0:      class=0x060401 card=0x244e8086 chip=0x244e8086 rev=0xe1 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:      class=0x060100 card=0x27b88086 chip=0x27b88086 rev=0x01 hdr=0x00
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:2:    class=0x010180 card=0x27c08086 chip=0x27c08086 rev=0x01 hdr=0x00
    class      = mass storage
    subclass   = ATA
none1@pci0:0:31:3:      class=0x0c0500 card=0x27da8086 chip=0x27da8086 rev=0x01 hdr=0x00
    class      = serial bus
    subclass   = SMBus
re0@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00
    class      = network
    subclass   = ethernet
none2@pci0:2:4:0:       class=0x020000 card=0x10cc16f3 chip=0x814910ec rev=0x10 hdr=0x00
    class      = network
    subclass   = ethernet
none3@pci0:2:6:0:       class=0x020000 card=0x10cc16f3 chip=0x814910ec rev=0x10 hdr=0x00
    class      = network
    subclass   = ethernet
none4@pci0:2:7:0:       class=0x020000 card=0x10cc16f3 chip=0x814910ec rev=0x10 hdr=0x00
    class      = network
    subclass   = ethernet



DMESG output :

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE-p5 #0: Wed Apr 22 15:35:36 EDT 2009
    sullrich@RELENG_1_2-snapshots.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Atom(TM) CPU  330   @ 1.60GHz (1601.59-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x106c2  Stepping = 2
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,<b22>>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
  Logical CPUs per core: 4
real memory  = 2137587712 (2038 MB)
avail memory = 2081943552 (1985 MB)
ACPI APIC Table: <IntelR AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f5e0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfdf80000-0xfdfbffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xfddff000-0xfddfffff,0xfdef0000-0xfdefffff irq 16 at device 0.0 on pci1
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:30:18:ab:4a:d8
re0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 4.0 (no driver attached)
pci2: <network, ethernet> at device 6.0 (no driver attached)
pci2: <network, ethernet> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcc000-0xccfff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
rue0: <Linksys Linksys USB LAN Adapter, class 0/0, rev 1.10/1.00, addr 2> on uhub0
miibus1: <MII bus> on rue0
ruephy0: <RealTek RTL8150 internal media interface> PHY 0 on miibus1
ruephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rue0: WARNING: using obsoleted if_watchdog interface
rue0: WARNING: using obsoleted IFF_NEEDSGIANT flag
rue0: Ethernet address: 00:1a:70:90:a0:6d
rue1: <Linksys Linksys USB LAN Adapter, class 0/0, rev 1.10/1.00, addr 2> on uhub1
miibus2: <MII bus> on rue1
ruephy1: <RealTek RTL8150 internal media interface> PHY 0 on miibus2
ruephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rue1: WARNING: using obsoleted if_watchdog interface
rue1: WARNING: using obsoleted IFF_NEEDSGIANT flag
rue1: Ethernet address: 00:1a:70:90:a0:6c
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 3> on uhub1
kbd2 at ukbd0
uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 3> on uhub1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad0: 3919MB <SanDisk SDCFX3-004G HDX 4.32> at ata0-master UDMA66
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/ad0s1a

>How-To-Repeat:
By using any NEW Jetway Board, Daughterboard, ... I've heard it's been used some other Mini-ITX and ITX boards like MSI, Tyan
>Fix:
I have no idea but someone has replied my post on pfsense forum :

Well it looks like the only issue is that Jetway has changed the PCI IDs and that those IDs are not claimed by the re driver. It should be a trivial kernel patch to fix this, but I don't have the expertise or development environment set up to do it myself.

>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200904300346.n3U3kNxZ051833>