Date: Tue, 26 Feb 2002 15:43:12 +0800 From: Ying-Chieh Liao <ijliao@csie.nctu.edu.tw> To: freebsd-mobile@FreeBSD.ORG Subject: Toshiba Portege 3490 with Xircom R2BE-100BTX Message-ID: <20020226074312.GA55110@terry.dragon2.net>
next in thread | raw e-mail | index | archive | help
--NDin8bjvE/0mNLFQ
Content-Type: multipart/mixed; boundary="4Ckj6UjgE2iN1+kY"
Content-Disposition: inline
--4Ckj6UjgE2iN1+kY
Content-Type: text/plain; charset=big5
Content-Disposition: inline
I've installed 5.0 current on my 3490
everything is ok, including world, kernel, X
but my Xircom R2BE-100BTX is not working
I'm using NEWCARD kernel config, and here is my dmesg
any idea about making it work ?
--
Pi seconds is a nanocentury.
--- Tom Duff
--4Ckj6UjgE2iN1+kY
Content-Type: text/plain; charset=big5
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #6: Tue Feb 26 01:12:57 CST 2002
root@zzz.Dorm11.NCTU.edu.tw:/usr/obj/usr/src/sys/PORTEGE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03bc000.
Preloaded elf module "/boot/kernel/msdosfs.ko" at 0xc03bc0a8.
Preloaded elf module "/boot/kernel/procfs.ko" at 0xc03bc154.
Preloaded elf module "/boot/kernel/md.ko" at 0xc03bc200.
Preloaded elf module "/boot/kernel/logo_saver.ko" at 0xc03bc2a8.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc03bc358.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc03bc404.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc03bc4b0.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc03bc55c.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc03bc608.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc03bc6b4.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc03bc75c.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc03bc804.
Preloaded elf module "/boot/kernel/random.ko" at 0xc03bc8b0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03bc95c.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (700.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268304384 (262016K bytes)
avail memory = 257142784 (251116K bytes)
Pentium Pro MTRR support enabled
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc0289e62 (1000022)
VESA: S3 Incorporated. M7 BIOS
Using $PIR table, 9 entries at 0xc00f0170
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443MX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcm0: <Intel 443MX> port 0xfcc0-0xfcff,0xfd00-0xfdff irq 11 at device 0.1 on pci0
pci0: <old, non-VGA display device> at device 0.2 (no driver attached)
pci0: <simple comms> at device 2.0 (no driver attached)
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf870-0xf87f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82443MX USB controller> port 0xf840-0xf85f irq 11 at device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <unknown> at device 9.0 (no driver attached)
pccbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
cardbus0: <CardBus bus> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:11 INTA routed to irq 11
pccbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
cardbus1: <CardBus bus> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
pci_cfgintr_linked: linked (61) to hard-routed irq 11
pci_cfgintr: 0:11 INTB routed to irq 11
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
pmtimer0 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
found-> vendor=0x115d, dev=0x0003, revid=0x03
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=128
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 7.0
Product name: Xircom | RealPort2 CardBus Ethernet 10/100 | R2BE-100BTX | 1.00 |
TUPLE: Unknown(0x88) [4]: 1f ce b2 00
TUPLE: Unknown(0x8a) [12]: 39 30 30 34 44 44 42 32 43 45 31 46
TUPLE: Unknown(0x8b) [4]: 02 00 00 00
Manufacturer ID: 0501030181
TUPLE: DATE [4]: d7 4e db 28
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060010a4b2ce1f
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0501
TUPLE: DEVICE_OC [2]: 02 d8
cardbus0: Opening BAR: type=IO, bar=10, len=0080
cardbus0: Opening BAR: type=MEM, bar=14, len=0800
cardbus0: Opening BAR: type=MEM, bar=18, len=0800
cardbus0: Invalid BAR number: 27(06)
TUPLE: CONFIG_CB [6]: 03 02 03 01 00 00
TUPLE: CFTABLE_ENTRY_CB [12]: 41 b9 01 b5 1e 02 b0 fe ff 8c fb 04
TUPLE: CFTABLE_ENTRY_CB [3]: 02 08 00
TUPLE: NO_LINK [0]:
CIS reading done
cardbus0: Non-prefetchable memory at 84002000-84002fff
cardbus0: Non-prefetchable memory rid=18 at 84002000-840027ff (800)
cardbus0: Non-prefetchable memory rid=14 at 84002800-84002fff (800)
cardbus0: IO port at 1000-107f
cardbus0: IO port rid=10 at 1000-107f
cardbus0: <unknown card> (vendor=0x115d, dev=0x0003) at 0.0 irq 11
pccbb0: CardBus card activation failed
ad0: 19077MB <TOSHIBA MK2016GAP> [38760/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a
--4Ckj6UjgE2iN1+kY--
--NDin8bjvE/0mNLFQ
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
Comment: For info see http://www.gnupg.org
iD8DBQE8ezyQrMYBZRHAI4IRAmGsAKDphnsSiDpw8ffGpuxZjnFgaTGeWgCfSL6r
1BfqHG11m5I4onDTZ2wsfnE=
=fW0y
-----END PGP SIGNATURE-----
--NDin8bjvE/0mNLFQ--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020226074312.GA55110>