Date: Sat, 16 Feb 2002 09:19:33 -0500 From: Glenn Gombert <ggombert@imatowns.com> To: Matthew Dillon <dillon@apollo.backplane.com>, current@freebsd.org Cc: sos@freebsd.dk Subject: Re: current kernel crashing in ata_raid_attach at boot Message-ID: <3.0.6.32.20020216091933.00daf210@imatowns.com> In-Reply-To: <200202160608.g1G68Uv83371@apollo.backplane.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thats the same error message I got when trying to rebuild everything from -Current in the last few days on my Dell 410 Workstation at work ......a kernel from 3-4 weeks ago works fine.... At 10:08 PM 2/15/2002 -0800, Matthew Dillon wrote: > This is on a DELL2550. I do not have any ATA hard drives, let alone ata > raid drives or, in fact, any raid drives of any kind. I do have an ata > CDROM. > > A Feb 5 -current kernel boots fine. > > -Matt > Matthew Dillon > <dillon@backplane.com> > >/boot/kernel/acpi.ko text=0x2ae68 data=0x1618+0x6ec syms=[0x4+0x4df0+0x4+0x66dd] >Copyright (c) 1992-2002 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 5.0-CURRENT #0: Fri Feb 15 21:51:48 PST 2002 > dillon@apollo.backplane.com:/usr/obj/FreeBSD/FreeBSD-current/src/sys/DELL2550 >Preloaded elf kernel "/boot/kernel/kernel" at 0xc03c5000. >Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03c50a8. >Timecounter "i8254" frequency 1193182 Hz >CPU: Pentium III/Pentium III Xeon/Celeron (1130.46-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,MMX,FXSR,SSE> >real memory = 1073676288 (1048512K bytes) >avail memory = 1040916480 (1016520K bytes) >Changing APIC ID for IO APIC #0 from 0 to 2 on chip >Changing APIC ID for IO APIC #1 from 0 to 3 on chip >Programming 16 pins in IOAPIC #0 >IOAPIC #0 intpin 2 -> irq 0 >Programming 16 pins in IOAPIC #1 >FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 > cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 > io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 >Pentium Pro MTRR support enabled >Using $PIR table, 8 entries at 0xc00fc270 >npx0: <math processor> on motherboard >npx0: INT 16 interface >acpi0: <DELL PE2550 > on motherboard >acpi0: power button is handled as a fixed feature programming model. >Timecounter "ACPI" frequency 3579545 Hz >acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >acpi_cpu0: <CPU> on acpi0 >acpi_cpu1: <CPU> on acpi0 >acpi_pcib0: <Host-PCI bridge> on acpi0 >pci0: <PCI bus> on acpi_pcib0 >pci0: <display, VGA> at device 14.0 (no driver attached) >isab0: <PCI-ISA bridge> port 0x8a0-0x8af at device 15.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0 >ata0: at 0x1f0 irq 14 on atapci0 >ata1: at 0x170 irq 15 on atapci0 >acpi_pcib1: <Host-PCI bridge> on acpi0 >IOAPIC #1 intpin 1 -> irq 2 >pci1: <PCI bus> on acpi_pcib1 >pci1: <network, ethernet> at device 8.0 (no driver attached) >acpi_pcib2: <Host-PCI bridge> on acpi0 >IOAPIC #1 intpin 0 -> irq 5 >pci2: <PCI bus> on acpi_pcib2 >pcib3: <PCI-PCI bridge> at device 2.0 on pci2 >IOAPIC #1 intpin 15 -> irq 10 >IOAPIC #1 intpin 14 -> irq 11 >pci3: <PCI bus> on pcib3 >ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xcc00-0xccff mem 0xfe7ff000-0xfe7fffff irq 10 at device 4.0 on pci3 >aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs >ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfe7fe000-0xfe7fefff irq 11 at device 4.1 on pci3 >aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs >fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xbcc0-0xbcff mem 0xfe500000-0xfe5fffff,0xfe900000-0xfe900fff irq 5 at device 4.0 on pci2 >fxp0: Ethernet address 00:06:5b:19:be:6f >inphy0: <i82555 10/100 media interface> on miibus0 >inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 on acpi0 >fdc0: FIFO enabled, 8 bytes threshold >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >sio0 port 0x3f8-0x3ff irq 4 on acpi0 >sio0: type 16550A, console >sio1 port 0x2f8-0x2ff irq 3 on acpi0 >sio1: type 16550A >fdc: fdc0 already exists; skipping it >ata: ata0 already exists; skipping it >ata: ata1 already exists; skipping it >atkbdc: atkbdc0 already exists; skipping it >sio: sio0 already exists; skipping it >sio: sio1 already exists; skipping it >sc: sc0 already exists; skipping it >vga: vga0 already exists; skipping it >orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xcdfff,0xc0000-0xc7fff on isa0 >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x100> >APIC_IO: Testing 8254 interrupt delivery >APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 >APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 >Fatal trap 12: page fault while in kernel mode >cpuid = 0; lapic.id = 01000000 >fault virtual address = 0x0 >fault code = supervisor read, page not present >instruction pointer = 0x8:0xc0151134 >stack pointer = 0x10:0xc03e7d54 >frame pointer = 0x10:0xc03e7d64 >code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 >processor eflags = interrupt enabled, resume, IOPL = 0 >current process = 0 (swapper) >kernel: type 12 trap, code=0 >Stopped at ata_raid_attach+0x18: movl 0(%eax,%edx,4),%ebx >db> trace >ata_raid_attach(c1c629e0,c1c65df8,c03e7d84,c01b3556,0) at ata_raid_attach+0x18 >ata_boot_attach(0) at ata_boot_attach+0x13d >run_interrupt_driven_config_hooks(0,3e4c00,3e4000,0,c0121b7c) at run_interrupt_driven_config_hooks+0x1a >mi_startup() at mi_startup+0x90 >begin() at begin+0x43 >db> > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-current" in the body of the message > Glenn Gombert ggombert@imatowns.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.6.32.20020216091933.00daf210>