Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 2 Jun 1996 10:19:24 -0400 (EDT)
From:      Chuck Robey <chuckr@Glue.umd.edu>
To:        "Jonathan M. Bresler" <jmb@freefall.freebsd.org>
Cc:        FreeBSD-Questions@FreeBSD.org
Subject:   Re: Booting up
Message-ID:  <Pine.OSF.3.91.960602101705.3133A-100000@maryann.eng.umd.edu>
In-Reply-To: <199606020421.VAA29156@freefall.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 1 Jun 1996, Jonathan M. Bresler wrote:

[some deletions]
> > > 	are all three on the primary scsi controller?
> > > 	i have an ncr on the motherboard nd a second ncr pci card,
> > > 	but i can only boot from disks connected to the first (motherboard)
> > > 	ncr controller 
> > 
> > Yeah, just one controller, a Tyan one (obviously oem'ed from NCR).
> > All three have partition tables made by dos, but only one has
> > an active dos partition.  Actually, that's not true, FreeBSD made the 
> > partition tables on the first 2 disks, dos only did the third one.
> 
> 	does bteasy offer you the choice of the other two disks??
> 	you should see an option "F5 disk 2" or some such.
> 	BUT looking at the code, it appears that bteasy-1.7 does not
> 	allow you to boot from the third or higher disk ;(
> 	rather if your BIOS reports 3 disks, bteasy-1.7 behaves as
> 	if there is only one disk!  fie!
[more deletions]
> 
> 	more over bteasy-1.7 relies upon BIOS int 13 to select which
> 	drive it will read the partition (dos partitions aka slices
> 	*not* unix partitions) table from.  i dont know if the drive
> 	parameter (register dl) can legally point to a drive other
> 	than the first or second drive.  van gilluwe does not say ;(
> 
> 	so.....rearrange your drives.  put dos on either the first or
> 	second drive.  exit your fstab to match the changes.  if you
> 	have dump scripts dont forget to edit them as well.

OK, I'll do that.  The manual for the controller states that all seven 
IDs are set as 80-87, but I guess bteasy won't allow that.  Thanks!

----------------------------+-----------------------------------------------
Chuck Robey                 | Interests include any kind of voice or data 
chuckr@eng.umd.edu          | communications topic, C programming, and Unix.
9120 Edmonston Ct #302      |
Greenbelt, MD 20770         | I run Journey2 and n3lxx, both FreeBSD
(301) 220-2114              | version 2.2 current -- and great FUN!
----------------------------+-----------------------------------------------




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.3.91.960602101705.3133A-100000>