Date: Sat, 29 Jul 2000 21:08:51 EDT From: "Wahyudi Gunawan" <wahyudi@hotmail.com> To: scsi@freebsd.org Subject: ahc0 for Ultra160 Message-ID: <F125eBBsQwY6YHkidcD0000d2e9@hotmail.com>
next in thread | raw e-mail | index | archive | help
Hi, I have a problem when installing FreeBSD 4.0 or 4.1 to my machine. I did my installation from an FTP server. The installation will run for sometime and suddenly it freeze in the middle Here are the message that I got: No active SCB for reconnecting target-issuing BUS DEVICE RESET saved TCL=0x10 ARG_1=0x48, SEQ_FLAG=0x0 ahc0: Interrupted 0x0 ahc0: Warning no command for SCB 72 (cmdcmplt) QOUTPOST=65 (da0:ahc0:0:0:1:0):SCB 0x48-timeout while idle SEQ_ADDR=0xa (da0:ahc0:0:0:1:0):Queueing a BDR SCB QOUTPOST=2 (da0:ahc0:0:0:1:0):SCB 0x48-timeout while idle, SEQ_ADDR=0xa (da0:ahc0:0:0:1:0):no longer timeout, status=34B ahc0: Issued channel A Bus reset, 1 SCB aborted ahc0:A:1: ahc_intr_ referenced SCB not valid during segint 0x71 scb (72) My machine is: Kayak XU800, 9.1G Quantum Ultra 160, adaptec 7892. I already set the speed to 80M. Can somebody help about this? I already don't know what to do Thanks in advance -WG ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F125eBBsQwY6YHkidcD0000d2e9>