Date: Thu, 27 Dec 2001 14:25:34 -0500 From: "Phil Rosenthal" <pr@isprime.com> To: "Jonathan Lemon" <jlemon@flugsvamp.com>, <net@freebsd.org> Subject: Re: FXP Bundling on a STL2 Message-ID: <000801c18f0c$41ef0ed0$6701a8c0@winter> References: <200112271815.fBRIFEX02892@prism.flugsvamp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
dmesg says: fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6 But it only appears to do anything on the fxp1 (the external one) From systat -vm: ~3000 interrupts ~500 interrupts from netstat -I fxp0 -in 1: input ~3000 packets per second from netstat -I fxp1 -in 1: input ~1700 packets per second --Phil ----- Original Message ----- From: "Jonathan Lemon" <jlemon@flugsvamp.com> To: <pr@isprime.com>; <net@freebsd.org> Sent: Thursday, December 27, 2001 1:15 PM Subject: Re: FXP Bundling on a STL2 > In article <local.mail.freebsd-net/20011225094752$76be@prism.net> you write: > >I noticed that the FXP built in to my STL2 motherboards seem to get have no > >difference on 4.5-PRERELEASE wether bundling is on or off, but an external > >FXP PCI card does begin to have a difference when receiving ~1000 pps (about > >half the interrupts). > >Does the STL2 FXP not support bundling? > > Check /var/log/messages. If there is a line that says "Microcode loaded...", > then the board is successfully running the new microcode, otherwise your > variant is not supported. (either no ucode, or hardware doesn't support it) > -- > Jonathan > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000801c18f0c$41ef0ed0$6701a8c0>