Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 05 Apr 2003 23:47:51 +0200
From:      Paul van der Zwan <paulz@vanderzwan.org>
To:        freebsd-current@freebsd.org
Subject:   ATA problems on Promise controller
Message-ID:  <3E8F4F07.8080902@vanderzwan.org>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------090106070308000903060308
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

With a -current kernel ( cvsupped today ) I can no longer boot.
It hangs on the drives connected to the promis controller built into my 
MSI KT266 mobo.
The messages are like

ad2: READ command timeout tag=0 serv=0 - resetting

Same for ad3. It tries falling back to pio mode but after that it hangs 
completely.
I have tried putting hw.at.tags=0 in /boot/loader.conf as suggested in 
some older messages on this list but that dit not help.

dmesg of a working kernel built 19-1-2003 is attached




--------------090106070308000903060308
Content-Type: text/plain;
 name="dmesg.out"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.out"

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sun Jan 19 15:50:33 MET 2003
    paulz@trantor.vanderzwan.org:/raid/bsd/obj/raid/bsd/freebsd/src/sys/trantor
Preloaded elf kernel "/boot/kernel.ok/kernel" at 0xc04b1000.
Preloaded elf module "/boot/kernel.ok/acpi.ko" at 0xc04b10ac.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1405012013 Hz
CPU: AMD Athlon(tm) XP 1600+ (1405.01-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 516407296 (492 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: flags 0x7 npx0: INT 16 interface
acpi0: <AMIINT > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 10 entries at 0xc00f7d80
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <display, VGA> at device 6.0 (no driver attached)
pci0: <network, ethernet> at device 7.0 (no driver attached)
sym0: <810a> port 0xd800-0xd8ff mem 0xdbfeff00-0xdbfeffff irq 10 at device 8.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
atapci0: <Promise ATA100 controller> port 0xc400-0xc43f,0xc800-0xc803,0xcc00-0xcc07,0xd000-0xd003,0xd400-0xd407 mem 0xdbfc0000-0xdbfdffff irq 11 at device 12.0 on pci0
ata2: at 0xd400 on atapci0
ata3: at 0xcc00 on atapci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 ATA100 controller> port 0xff00-0xff0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 10 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhci1: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 10 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
ugen0: Genesys Logic USB Host To Host Bridge, rev 1.00/1.80, addr 2
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 10 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub2: port error, restarting port 2
uhub2: port error, giving up port 2
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xd1000-0xd3fff,0xc9000-0xd0fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: CPU throttling available, 16 steps from 100% to 6.2%
ad0: 28629MB <ST330621A> [58168/16/63] at ata0-master UDMA100
ad1: 29312MB <Maxtor 33073H3> [59556/16/63] at ata0-slave UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master PIO4
ar0: 78533MB <ATA RAID0 array> [10011/255/63] status: READY subdisks:
 0 READY ad2: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata2-master UDMA100
 1 READY ad3: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata3-master UDMA100
Waiting 2 seconds for SCSI devices to settle
Opened disk ad2 -> 16
Opened disk ad2 -> 16
Opened disk ad3 -> 16
Opened disk ad3 -> 16
Mounting root from ufs:/dev/ad0s1a
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc3f mem 0xdbe00000-0xdbefffff,0xdbfee000-0xdbfeefff irq 12 at device 7.0 on pci0
fxp0: Ethernet address 00:d0:b7:0e:a9:cb
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

--------------090106070308000903060308--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E8F4F07.8080902>