Date: Tue, 7 Feb 2006 20:21:22 GMT From: Kostas Zorbadelos <kzorba@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/92991: FreeBSD(amd64) freezes when primary disk is on a SiI 3512 SATA150 controller Message-ID: <200602072021.k17KLMam005752@www.freebsd.org> Resent-Message-ID: <200602072030.k17KU8Bm012916@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 92991 >Category: amd64 >Synopsis: FreeBSD(amd64) freezes when primary disk is on a SiI 3512 SATA150 controller >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Feb 07 20:30:08 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Kostas Zorbadelos >Release: Freebsd 6.0-RELEASE >Organization: OTENET SA >Environment: FreeBSD enigma-home.lan 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005 root@rat.samsco.home:/usr/obj/usr/src/sys/GENERIC amd64 >Description: I have a GIGABYTE motherboard (GA-K8NS-Ultra-939) based on nforce3 Ultra chipset. It has 2 SATA controllers, a nVidia nForce3 Pro SATA150 and a SiI 3512 SATA150 with raid capabilities. I have a single SEAGATE SATA II 160 GB (7200.9) disk in the system (recently replaced my previous faulted SEAGATE). During FreeBSD installation the disk was on the Silicon controller. The installation froze in the first attempt and I managed to install the system by de-activating ACPI. However after the boot (1 or 2 minutes) I received the following messages in the console: ata4: reiniting channel ata4: DISCONNECT requested ata4: SATA connect readytime=350ms ata4: sata_connect devices=0x1<ATA-MASTER> subdisk8: detached ad8: detached ata4: DISCONNECTED After that, the system froze and the only thing I could do is hit the power button. I disabled ACPI without success. After placing the disk to the Nvidia controller the problems disappeared. dmesg output on the system follows: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005 root@rat.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.81-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 1073676288 (1023 MB) avail memory = 1025011712 (977 MB) ACPI APIC Table: <Nvidia AWRDACPI> ioapic0 <Version 1.1> irqs 0-23 on motherboard acpi0: <Nvidia AWRDACPI> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNK1> on acpi0 pci_link1: <ACPI PCI Link LNK2> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNK3> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNK4> irq 9 on acpi0 pci_link4: <ACPI PCI Link LNK5> irq 11 on acpi0 pci_link5: <ACPI PCI Link LUBA> irq 9 on acpi0 pci_link6: <ACPI PCI Link LUBB> irq 9 on acpi0 pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0 pci_link8: <ACPI PCI Link LAPU> on acpi0 pci_link9: <ACPI PCI Link LACI> irq 10 on acpi0 pci_link10: <ACPI PCI Link LMCI> on acpi0 pci_link11: <ACPI PCI Link LSMB> irq 5 on acpi0 pci_link12: <ACPI PCI Link LUB2> irq 9 on acpi0 pci_link13: <ACPI PCI Link LFIR> on acpi0 pci_link14: <ACPI PCI Link L3CM> on acpi0 pci_link15: <ACPI PCI Link LIDE> on acpi0 pci_link16: <ACPI PCI Link LSID> on acpi0 pci_link17: <ACPI PCI Link LFID> irq 11 on acpi0 pci_link18: <ACPI PCI Link APC1> irq 16 on acpi0 pci_link19: <ACPI PCI Link APC2> irq 17 on acpi0 pci_link20: <ACPI PCI Link APC3> irq 18 on acpi0 pci_link21: <ACPI PCI Link APC4> irq 19 on acpi0 pci_link22: <ACPI PCI Link APC5> irq 16 on acpi0 pci_link23: <ACPI PCI Link APCF> irq 0 on acpi0 pci_link24: <ACPI PCI Link APCG> irq 0 on acpi0 pci_link25: <ACPI PCI Link APCH> irq 0 on acpi0 pci_link26: <ACPI PCI Link APCI> irq 0 on acpi0 pci_link27: <ACPI PCI Link APCJ> irq 0 on acpi0 pci_link28: <ACPI PCI Link APCK> irq 0 on acpi0 pci_link29: <ACPI PCI Link APCS> irq 23 on acpi0 pci_link30: <ACPI PCI Link APCL> irq 0 on acpi0 pci_link31: <ACPI PCI Link APCM> irq 0 on acpi0 pci_link32: <ACPI PCI Link AP3C> irq 0 on acpi0 pci_link33: <ACPI PCI Link APCZ> irq 0 on acpi0 pci_link34: <ACPI PCI Link APSI> irq 0 on acpi0 pci_link35: <ACPI PCI Link APSJ> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0 pci_link29: BIOS IRQ 5 for -2145774616.1.INTA is invalid pci_link23: BIOS IRQ 9 for -2145774616.2.INTA is invalid pci_link24: BIOS IRQ 9 for -2145774616.2.INTB is invalid pci_link30: BIOS IRQ 9 for -2145774616.2.INTC is invalid pci_link25: BIOS IRQ 5 for -2145774616.5.INTA is invalid pci_link27: BIOS IRQ 10 for -2145774616.6.INTA is invalid pci_link35: BIOS IRQ 11 for -2145774616.10.INTA is invalid pci0: <ACPI PCI bus> on pcib0 agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfc003000-0xfc003fff irq 20 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfc004000-0xfc004fff irq 21 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc005000-0xfc0050ff irq 22 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered nve0: <NVIDIA nForce MCP7 Networking Adapter> port 0xb400-0xb407 mem 0xfc000000-0xfc000fff irq 20 at device 5.0 on pci0 nve0: Ethernet address 00:0f:ea:ed:13:01 miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: Ethernet address: 00:0f:ea:ed:13:01 nve0: [GIANT-LOCKED] pcm0: <nVidia nForce3 250> port 0xb800-0xb8ff,0xbc00-0xbc7f mem 0xfc001000-0xfc001fff irq 21 at device 6.0 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC850 AC97 Codec> atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f,0xdc00-0xdc7f irq 22 at device 10.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci_link20: BIOS IRQ 21 for 0.6.INTA is invalid pci_link20: BIOS IRQ 22 for 0.10.INTA is invalid pci2: <ACPI PCI bus> on pcib2 skc0: <Marvell Gigabit Ethernet> port 0x8000-0x80ff mem 0xfb000000-0xfb003fff irq 19 at device 11.0 on pci2 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0f:ea:ed:13:03 miibus1: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto atapci2: <SiI 3512 SATA150 controller> port 0x8400-0x8407,0x8800-0x8803,0x8c00-0x8c07,0x9000-0x9003,0x9400-0x940f mem 0xfb009000-0xfb0091ff irq 17 at device 13.0 on pci2 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 fwohci0: <Texas Instruments TSB82AA2> mem 0xfb008000-0xfb0087ff,0xfb004000-0xfb007fff irq 18 at device 14.0 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:0f:ea:56:00:e6:5b:2e fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0f:ea:e6:5b:2e fwe0: Ethernet address: 02:0f:ea:e6:5b:2e fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fwohci0: phy int fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Samsung Electro Mechanics Optical Mouse, rev 1.00/0.04, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1808811566 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <NEC DVD RW ND-3540A/1.01> at ata0-master UDMA33 acd1: DVDROM <TEAC DV-516G/F4S3> at ata0-slave UDMA33 ad4: 152627MB <Seagate ST3160812AS 3.AAD> at ata2-master SATA150 Trying to mount root from ufs:/dev/ad4s3a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 288 files 6 WARNING: /var was not properly dismounted /var: mount pending error: blocks 864 files 17 >How-To-Repeat: The problem occured everytime a couple of minutes after booting, with the disk on the silicon controller >Fix: Used the other (Nvidia) SATA controller of the motherboard >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200602072021.k17KLMam005752>