Date: Fri, 8 Sep 2000 14:55:56 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Bernd Walter <ticso@cicely5.cicely.de> Cc: Christian Weisgerber <naddy@mips.inka.de>, freebsd-alpha@FreeBSD.ORG Subject: Re: cvs commit: src/sys/pci pcisupport.c (fwd) Message-ID: <Pine.LNX.4.21.0009081455170.15724-100000@zeppo.feral.com> In-Reply-To: <20000908221428.B12535@cicely5.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
This is what is broken for me too. I have not been able to really trace it down yet. I don't have the halt switch set up. > On Thu, Sep 07, 2000 at 12:31:30AM +0200, Christian Weisgerber wrote: > > Andrew Gallatin <gallatin@cs.duke.edu> wrote: > > > > > Could you put some printfs in the top of cia_pcib_read_config() and > > > cia_pcib_write_config() and print out the b, s, f, reg & width args? > > > > ... > > pci0: physical bus=0 > > cia_pcib_read_config: b=0, s=0, f=0, reg=0, width=4 > > cia_pcib_read_config: b=0, s=1, f=0, reg=0, width=4 > > cia_pcib_read_config: b=0, s=2, f=0, reg=0, width=4 > > cia_pcib_read_config: b=0, s=3, f=0, reg=0, width=4 > > cia_pcib_read_config: b=0, s=4, f=0, reg=0, width=4 > > cia_pcib_read_config: b=0, s=5, f=0, reg=0, width=4 > > cia_pcib_read_config: b=0, s=5, f=0, reg=0, width=2 > > Exactly the same here with an PC164 seriel console system and a recent > current. > > > > Also, if you've got a halt switch, can you press it & map the address > > > the SRM console gives for the PC and RA > > > > When the machine locks up, halt doesn't work anymore. I need to > > reset the box. > > Same here. > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0009081455170.15724-100000>