Date: Wed, 06 Dec 2000 11:41:23 -0700 From: Joseph R Lewis <sharktooth@innocent.com> To: Nader Turki <nturki@adelphia.net> Cc: mattb@finsyn.com, freebsd-questions@FreeBSD.ORG Subject: Re: TNT2 Message-ID: <3A2E8853.B0E69B33@innocent.com> References: <71F816A89AA9D3119F4C00D0B7094EFC20635A@FIN_SYN> <3A2E8661.2EBD205@adelphia.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Check your kernal secure level. If it's greater than zero, X can't start. If you are in FreeBSD 4.1.1 just set the kern.securelevel variable in the /etc/rc.conf file to 0. Joe Lewis Nader Turki wrote: > Hello all, > > I tried 3 diff TNT2 cards. Right now I have a Diamond VIPER V770. > Many say it should work fine. But I keep getting an error. I got the same > error with the 3 diff TNT2 cards. > The error says: > > SuperProb: KDENABIO failed > SuperProbe: Cannot open video > > I mean could it be something else that causing the problem? other than the > video card? could it be the motherboard maybe? > > I can't even try to setup XFree86 from /stand/sysinstall :( > It fails! > > Thanks, > > --Nader > > Matt Bettinger wrote: > > > I have the card and it works fine with free86 and metroX. > > > > -----Original Message----- > > From: owner-freebsd-questions@FreeBSD.ORG > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Nader Turki > > Sent: Saturday, December 02, 2000 3:07 PM > > To: freebsd-questions@FreeBSD.ORG > > Subject: TNT2 > > > > Hello guys, > > Is there anybody using Viper V770 Standard 32mb AGP Video card? it's a > > (NVIDIA RIVA TNT2) > > I just wanted to check before I buy it. 'cause I had a TNT2 card before > > and I used to get errors whenever trying to startx. > > > > Thanks, > > > > -Nader > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A2E8853.B0E69B33>