Date: Tue, 7 May 1996 12:42:02 -0400 (EDT) From: Andrew Gallatin <gallatin@stat.Duke.EDU> To: freebsd-current@freebsd.org Subject: Re: -current not booting Message-ID: <199605071642.MAA04321@diego.isds.duke.edu> In-Reply-To: <9605071252.AA10462@ginger.cb.att.com> References: <9605071252.AA10462@ginger.cb.att.com>
next in thread | previous in thread | raw e-mail | index | archive | help
ejc@nasvr1.cb.att.com writes:
> Hello
> The last bootable -current kernel I have is from May 2nd.
> A kernel from may 3,4,5,6,7 loads but does not boot, it just reboots.
>
> Does anybody know what broke?
>
> ejc
>
> Lucent
>
I'm having similar problems on my new P6-180. A -current custom
kernel from today hung after loading. However, a GENERIC one booted.
The same custom kernel worked fine yesterday. I'm at ctm level
'src-cur 1761'. The working kernel is was at src-cur 1758. I've also
installed the latest bootblocks, which didn't seem to help.
I've appended my config file & dmesg output from the booting kernel.
Hope this helps.
Drew
machine "i386"
cpu "I686_CPU"
ident GENERIC
maxusers 10
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
#options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
# These three options provide support for System V Interface
# Definition-style interprocess communication, in the form of shared
# memory, semaphores, and message queues, respectively.
#
options SYSVSHM
options SYSVSEM
options SYSVMSG
options KTRACE
config kernel root on wd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x80ff80ff vector wdintr
disk wd0 at wdc0 drive 0
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
device ed0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector edintr
# Controls all sound devices
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
device sbxvi0 at isa? drq 5
device sbmidi0 at isa? port 0x330
pseudo-device loop
pseudo-device ether
pseudo-device log
#pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
# keep this if you want to be able to continue to use /stand/sysinstall
#pseudo-device gzip # Exec gzipped a.out's
FreeBSD 2.2-CURRENT #0: Mon May 6 11:30:52 EDT 1996
gallatin@vorlon.isds.duke.edu:/usr/src/sys/compile/VORLON
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 180061433 Hz, i8254 clock: 1193069 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
i586 clock: 0 Hz
CPU: Pentium Pro (180.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x616 Stepping=6
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV>
real memory = 16777216 (16384K bytes)
avail memory = 14880768 (14532K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82378IB PCI-ISA bridge> rev 136 on pci0:2
pci0:3: CMD, device=0x0646, class=storage (ide) int a irq 14 [no driver assigned]
vga0 <VGA-compatible display device> rev 83 int a irq 9 on pci0:14
chip1 <generic PCI bridge (vendor=8086 device=84c4 subclass=0)> rev 2 on pci0:25
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 00:40:01:41:ba:ff, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x63 irq 12 on motherboard
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa
wdc0: unit 0 (wd0): <WDC AC21000H>, 32-bit, multi-block-16
wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <HITACHI CDR-7930/1022>, removable, accel, dma, iordy
wcd0: 1377Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster 16 4.13>
sbxvi0 at 0x0 drq 5 on isa
sbxvo0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
<SoundBlaster MPU-401>
WARNING: / was not properly dismounted.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199605071642.MAA04321>