Date: Sun, 12 Oct 2003 14:29:38 -0700 From: Steve Kargl <sgk@troutmask.apl.washington.edu> To: "Kenneth D. Merry" <ken@kdm.org> Cc: freebsd-current@freebsd.org Subject: Re: cd0 errors during probe? Message-ID: <20031012212938.GA41887@troutmask.apl.washington.edu> In-Reply-To: <20031012205150.GA20611@panzer.kdm.org> References: <20031012172654.GA40529@troutmask.apl.washington.edu> <20031012205150.GA20611@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Oct 12, 2003 at 02:51:50PM -0600, Kenneth D. Merry wrote: > On Sun, Oct 12, 2003 at 10:26:54 -0700, Steve Kargl wrote: > > Can I assume that the following error messages are > > erronous because cd0 appears to function without > > any problems? There is a CD in the drive. > > > > cd0 at ahc0 bus 0 target 4 lun 0 > > cd0: <TOSHIBA CD-ROM XM-6401TA 1001> Removable CD-ROM SCSI-2 device > > cd0: 10.000MB/s transfers (10.000MHz, offset 15) > > cd0: cd present [129875 x 2048 byte records] > > (cd0:ahc0:0:4:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 > > (cd0:ahc0:0:4:0): CAM Status: SCSI Status Error > > (cd0:ahc0:0:4:0): SCSI Status: Check Condition > > (cd0:ahc0:0:4:0): BLANK CHECK asc:64,0 > > (cd0:ahc0:0:4:0): Illegal mode for this track > > (cd0:ahc0:0:4:0): Retrying Command (per Sense Data) > > Looks like GEOM is trying to read the first sector of the CD, but since > it's likely an audio CD, it doesn't quite work. > Yes, it is an audio CD. I suspected that it was a transient GEOM/CAM issue, but wanted to make sure before I needlessly replaced the cdrom drive. -- Steve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031012212938.GA41887>