Date: Thu, 13 Jan 2000 04:29:43 GMT From: Anthony Wyatt <Anthony.Wyatt@its.csiro.au> To: freebsd-questions@freebsd.org Subject: Failed to allocate IRQ for Xircom? Message-ID: <20000113.4294300@cabramurra-mi.cbr.its.csiro.au>
next in thread | raw e-mail | index | archive | help
Hi,
I've just installed 3.4 on my laptop, rebuilt the kernel and
trying=20
to get my Xircom card to work.
During the startup I get:
pccardd[56]: Failed to allocate IRQ for Xircom
pccardd[56]: pccardd started
My pccard.conf file is:
card "Xircom" "CreditCard Ethernet 10/100 + "
config 0x17 "sio3" ?
insert echo Xircom CreditCard Modem inserted
insert /etc/pccard_ether xe0
remove echo Xircom CreditCard Modem removed
remove /sbin/ifconfig xe0 delete
If I do I dmesg I get:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights=20
reserved.
FreeBSD 3.4-STABLE #2: Thu Jan 13 14:19:33 EST 2000
wya015@cabramurra-mi.cbr.its.csiro.au:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (267.27-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x650 Stepping =3D 0
=20
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 134217728 (131072K bytes)
avail memory =3D 127844352 (124848K bytes)
Preloaded elf kernel "kernel" at 0xc0299000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc029909c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge (AGP disabled)> rev 0x02 on=20
pci0.0.0
vga0: <NeoMagic NM2160 laptop SVGA controller> rev 0x00 int a irq 11 on =
pci0.2.0
pcic0: <TI PCI-1131 PCI-CardBus Bridge> rev 0x01 int a irq 11 on=20
pci0.3.0
pcic1: <TI PCI-1131 PCI-CardBus Bridge> rev 0x01 int b irq 11 on=20
pci0.3.1
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=3D0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTCA-24090>
wd0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
xe0: probe
xe0 not found
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
pcic: controller irq 5
Initializing PC-card drivers: xe sio
changing root device to wd0s2a
Card inserted, slot 1
Has anyone had this problem as well?
Anthony
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000113.4294300>