Date: Wed, 12 Nov 2008 19:19:31 +0200 From: Andriy Gapon <avg@icyb.net.ua> To: Alexander Motin <mav@FreeBSD.org> Cc: freebsd-multimedia@FreeBSD.org Subject: Re: Intel 82801I hda, STAC9271D codec: problem(s) Message-ID: <491B1023.2090605@icyb.net.ua> In-Reply-To: <491B0D30.2050102@icyb.net.ua> References: <4910CD23.9090902@icyb.net.ua> <491162E9.4020400@FreeBSD.org> <4911AA93.9050603@icyb.net.ua> <4911B9FE.6000505@FreeBSD.org> <4912E1A5.6040206@icyb.net.ua> <491AEB24.8030109@icyb.net.ua> <491AFF68.9080104@FreeBSD.org> <491B0D30.2050102@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
on 12/11/2008 19:06 Andriy Gapon said the following:
> Alexander,
>
> yes, this is it!
> With this hint (hint.hdac.0.cad2.nid10.config="misc=1") I now get
> playback from both front and back. Also, I just tested that 'mic' record
> source corresponds to back connector and 'monitor' to front connector,
> both work ('line' is not tested).
>
> One minor complaint is that there are the following knobs for mixer:
> $ mixer
> Mixer vol is currently set to 92:92
> Mixer pcm is currently set to 93:93
> Mixer speaker is currently set to 30:30
> Mixer rec is currently set to 45:45
> Recording source: monitor
>
> Because there is no volume control for mic or monitor, program like kmix
> display only "outputs" panel and there is no "inputs" panel. Because of
> that I can not switch recording sources via gui.
> But this is very minor.
>
>
And, BTW, it seems that both nodes 21 and 24 in record path have volume
controls. But I am not sure if it is worthwhile to expose them bot to mixer.
Also, I am not sure why we have both vol and pcm knobs when there is
only one node with volume ability in the play path. Is this because of
softpcm quirk somewhere?
--
Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?491B1023.2090605>