Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 8 Jul 2000 16:39:01 +0400 (MSD)
From:      Alexey Zakirov <frank@agava.com>
To:        freebsd-stable@freebsd.org
Subject:   kernel doesn't boot on smp after last cvsup
Message-ID:  <Pine.BSF.4.20.0007081636450.88722-100000@hellbell.domain>

next in thread | raw e-mail | index | archive | help
	Hail!

I have L440GX+ with two PIII-550. After last cvsup from
cvsup.internat.freebsd.org (about 15:30 8 Jul) my machine doesn't boot.
Machine reboots during kernel load after APIC operations:
==================================================
Copyright (c) 1992-2000 The FreeBSD Project.                                    
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994        
        The Regents of the University of California. All rights reserved.       
FreeBSD 4.0-STABLE #0: Sat Jul  8 16:12:34 MSD 2000                             
    frank@reality.agava.ru:/usr/src/sys/compile/REALITY                         
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (547.18-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory  = 805240832 (786368K bytes)
avail memory = 779747328 (761472K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
==================================================

Kernel from last week cvsup works just fine with same kernel config.

Is there any suggestions or comments?

P.S. my kernel config:
==================================================
machine		"i386"
cpu		"I686_CPU"
ident		REALITY
maxusers	256
options		NMBCLUSTERS=16384

options		SMP			# Symmetric MultiProcessor Kernel
options		APIC_IO			# Symmetric (APIC) I/O

options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	MFS			#Memory Filesystem

options 	PROCFS			#Process filesystem
options 	"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options		QUOTA			#enable disk quotas

options 	INET			#Internet communications protocols
options 	IPSEC			#IP security
options 	IPSEC_ESP		#IP security (crypto; define w/ IPSEC)
options 	IPFIREWALL		#firewall
options 	IPFIREWALL_VERBOSE	#print information about
options 	IPFIREWALL_FORWARD	#enable transparent proxy support
options 	IPDIVERT		#divert sockets
options 	IPSTEALTH		#support for stealth forwarding

options 	TCP_DROP_SYNFIN		#drop TCP packets with SYN+FIN
options 	TCP_RESTRICT_RST	#restrict emission of TCP RST
options 	ICMP_BANDLIM

options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options         SHMALL=8192
options         SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
options         SHMMAXPGS=8192
options         SHMMIN=2
options         SHMMNI=256
options         SHMSEG=128

options 	P1003_1B
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	_KPOSIX_VERSION=199309L

device		isa
device		pci

device		ata
device		atadisk		# ATA disk drives

device		npx0	at nexus? port IO_NPX flags 0x0 irq 13

device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 flags 0x0 irq 3

device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1

device		vga0	at isa?

device		sc0	at isa?

device		smbus		# Bus support, required for smb below.
device		intpm
device		smb
device		iicbus
device		iicbb
device		iicsmb

device		scbus			# base SCSI code
device		da			# SCSI direct access devices (aka disks)
device		pass			# CAM passthrough driver
device		ahc			# AHA2940 and onboard AIC7xxx devices
options		AHC_ALLOW_MEMIO
options		SCSI_DELAY=3000		# Be pessimistic about Joe SCSI device

device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)

pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	pty	64	# Pseudo-ttys (telnet etc)
pseudo-device	vn	4
pseudo-device	bpf	4	#Berkeley packet filter
pseudo-device	gif	4	#IPv6 and IPv4 tunneling
pseudo-device	ccd	8	#Concatenated disk driver
==================================================

*** WBR, Alexey Zakirov (frank@agava.com)



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.20.0007081636450.88722-100000>