Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 31 Mar 2003 19:37:55 -0600
From:      Juli Mallett <jmallett@FreeBSD.org>
To:        freebsd-current@FreeBSD.org
Cc:        freebsd-scsi@FreeBSD.org
Subject:   Odd issues with USB SmartMedia Reader/Writer (PNY)
Message-ID:  <20030331193755.A60987@FreeBSD.org>

next in thread | raw e-mail | index | archive | help
I'm really dumb when it comes to CAM, SCSI, USB, and so on, so forgive
if I am being naive...  (Also that would probably explain why I am
having a hard time deciding where this mail should end up... Forgive
me on that account, plz.)

I have a PNY USB SmartMedia reader which works excellently with 5.x
with 8M media, but which blows up with 32M media.  I'd assume this is
due to improper geometry or something, but I really have no idea.
Insert-reinsert produces no change in results, etc.  Below are bits
from dmesg, with the smaller then the larger.

Any insight would be appreciated.  Once this is taken care of, the
weekly reboots into windows to clean off the camera can finally stop...
Out last legitimate use of Windows :)

%%% --> With the 8M SmartMedia
umass0: Alcor Mass Storage Device, rev 1.10/1.00, addr 5
umass0: Get Max Lun not supported (STALLED)
umass0:0:0:-1: Attached to scbus0 as device 0
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device 
pass0: 1.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: 7MB (16000 512 byte sectors: 64H 32S/T 7C)
(da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing minimum_cmd_size to 10.
[0] f:80 typ:1 s(CHS):0/1/10 e(CHS):249/3/16 s:25 l:15975
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 12800 length 8179200 end 8191999
%%%

%%% --> With the 32M SmartMedia
umass0: Alcor Mass Storage Device, rev 1.10/1.00, addr 5
umass0: Get Max Lun not supported (STALLED)
umass0:0:0:-1: Attached to scbus0 as device 0
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device 
pass0: 1.000MB/s transfers
GEOM: new disk da0
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
%%%

Thanx!
juli.
-- 
juli mallett. email: jmallett@freebsd.org; aim: bsdflata; efnet: juli;



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030331193755.A60987>