Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 8 Jan 2009 10:37:05 -0600
From:      "Neal Hogan" <nealhogan@gmail.com>
To:        freebsd-questions@freebsd.org
Subject:   ndis panic HP pavilion ze4400 won't boot
Message-ID:  <ab7b49bc0901080837q7df5c835i1c8f1a01d200a146@mail.gmail.com>

Next in thread | Raw E-Mail | Index | Archive | Help
I'm father new to fBSD. I hope this is the appropriate list to send this
question to.

I just installed 7.1-RELEASE on my HP pavilion and attempted to configure my
Broadcom wlan card (BCM94309 version 4.10.40.0) using ndisgen. I cp'd the
bcmwl5_sys.ko to /boot/kernel and added *bcmwl5_sys_load="YES"* to my
/boot/loader.conf. Now the machine will not boot. It crashes when it reaches
the ndis0 line. I've tried booting in all the modes but they all fail to
boot. I can escape to prompt, but am unsure what, if anything, I can do in
that mode to deal with the situation.

With other releases (6.4 and 7.0) the machine would panick when I attempted
to ifconfig ndis0. However, I was able to boot in single user mode and
temporarily move the rc.conf file so that I cound boot in the default mode.
With 7.1, I don't appear to have that option.

Is there anything I can do, short of a fresh install, to eliminate this
problem? I'm not too worried about getting the wifi up (although, I won't
turn down any advice). I just want the machine to boot.

Thanks.
-- 
www.nealhogan.net



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?ab7b49bc0901080837q7df5c835i1c8f1a01d200a146>