Date: Wed, 14 Feb 2001 05:57:39 -0800 From: "3phase" <phase3@worldnet.att.net> To: <freebsd-questions@FreeBSD.ORG> Subject: CHAP will not work Message-ID: <001101c0968e$42f74e40$d9a1480c@sisyphus2>
next in thread | raw e-mail | index | archive | help
HELP! PLEASE!
My eyes are about to fall out of my head I've R so many FMs.
CHAP negotiation does not work. PPP makes four or five attempts to
athenticate and then drops the connection after receiving no response.
The modem lights are flashing so I know my ISP is responding.
I can not log on without CHAP.
Even using a regular terminal program my ISP automatically starts
negotiating CHAP the instant I enter my login name.
I was going to attach the ppp.log, an ifconfig screen shot and a few other
goodies from the last session but apparently they did not survive the
transfer to the DOS DMZ I am using to safely shuttle information between
FBSD and Windows. The only file that survived is my dmesg output.
Using the "device PNPBIOS" option in the kernel allowed many previously
hidden problems to be displayed during the boot probe. None of them are
particularly relevant to the CHAP problem but as it is the only file that
survived the transfer I guess I should include it before I re-boot to FBSD. :)
The components FBSD doesn't recognize I've identified using # comments.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Sat Feb 10 17:38:04 PST 2001
<root@3phase.bogus.domain.org:/usr/src/sys/compile/3phase>
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (232.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 100663296 (98304K bytes)
avail memory = 93634560 (91440K bytes)
Preloaded elf kernel "kernel" at 0xc0389000.
VESA: v2.0, 2048k memory, flags:0x1, mode table:0xc03257a2 (1000022)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md1: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 12.0 irq 9
pci0: <unknown card> (vendor=0x1274, dev=0x5880) at 13.0 irq 4
# Creative Labs Ensonique 128 PCI Soundcard (Won't work w/FBSD)
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x1000-0x10ff mem
0x40100000-0x40100fff irq 11 at device 14.0 on pci0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
tl0: <Compaq NetFlex-3/P Integrated> at device 16.0 on pci0
tl0: couldn't map ports/memory
device_probe_and_attach: tl0 attach returned 6
# Disabled in BIOS while troubleshooting
atapci0: <Promise ATA66 controller> port 0x1140-0x117f,0x1120-0x1123,0x1108-0x110f,0x1110-0x1113,0x1100-0x1107 mem
0x40000000-0x4001ffff irq 10 at device 18.0 on pci0
ata2: at 0x1100 on atapci0
ata3: at 0x1108 on atapci0
isab0: <Intel 82371SB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel PIIX3 ATA controller> port 0x1490-0x149f at device 20.1 on pci0
atapci1: Busmastering DMA not enabled
# It is enabled but FBSD doesn't like the PIIX3 controller.
ata0: at 0x1f0 irq 14 on atapci1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio1 at port 0x2f8-0x2ff irq 3 flags 0x20000 on isa0
sio1: type ST16650A
ppc0: parallel port not found.
# Parallel Port disabled in BIOS while troubleshooting
pca0 at port 0x40 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown0: <CPQa0ef> at port 0xc50-0xc51 on isa0
# Compaq Temp Sensor
unknown1: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x5ffffff on isa0
# System Board Extentions for PNP BIOS
unknown2: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
# FPU
unknown: <PNP0000> can't assign resources
unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
# System Timer
unknown: <PNP0200> can't assign resources
unknown: <PNP0800> can't assign resources
unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
# The CMOS clock
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown5: <PNP0a03> on isa0
unknown6: <PNP0c02> at port 0x10-0x18,0x1f,0x50-0x52,0x78-0x79,0x90-0x91,0x92,0x93-0x9f,0x398-0x399,0x4d
0-0x4d1,0xc06-0xc07,0xc52,0xc7c,0xc80-0xc83,0xcd6-0xcd7,0xcf8-0xcff,0x46e8
on isa0
# Motherboard Resources
unknown7: <ESS ES1868 Plug and Play AudioDrive> at port 0x800-0x807 on isa0
sbc0: <ESS ES1868> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
pcm0: <SB DSP 3.01 (ESS mode)> on sbc0
# Compaq/ESS ISA soundcard won't work w/FBSD either
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
IP Filter: initialized. Default = pass all, Logging = disabled
IP Filter: v3.3.8
ad4: 43967MB <Maxtor 54610H6> [89331/16/63] at ata2-master using UDMA66
ad6: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata3-master using UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-6302B> at ata0-master using BIOSPIO
Mounting root from ufs:/dev/da0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQPC ST32155N 0564> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001101c0968e$42f74e40$d9a1480c>