Date: Thu, 3 Mar 2016 15:53:27 -0800 From: Adrian Chadd <adrian@freebsd.org> To: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: odd behaviour on wireless on latest -head Message-ID: <CAJ-Vmo=HHRC=dYLQJP4pXrAFOcH%2BZFU%2BYddvuSQJmAndgdTiEg@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
hiya, there's something odd with the latest -head. it's not updating from 11b to 11n on 2GHz channels, which is very bleh. Does anyone else see it? ifconfig wlan0 shows 11b associated, not HT20 or HT40. but it /says/ it was associated: Mar 3 15:51:44 victoria kernel: wlan0: start running, 0 vaps running Mar 3 15:51:44 victoria kernel: wlan0: ieee80211_start_locked: up parent iwn0 Mar 3 15:51:44 victoria kernel: iwn0: iwn_read_firmware: ucode rev=0x09dd0401 Mar 3 15:51:44 victoria kernel: wlan0: start running, 1 vaps running Mar 3 15:51:44 victoria kernel: wlan0: ieee80211_new_state_locked: INIT -> SCAN (nrunning 0 nscanning 0) Mar 3 15:51:44 victoria kernel: wlan0: ieee80211_newstate_cb: INIT -> SCAN arg 0 Mar 3 15:51:44 victoria kernel: wlan0: sta_newstate: INIT -> SCAN (0) Mar 3 15:51:45 victoria kernel: wlan0: [e8:fc:af:94:fc:fc] station assoc via MLME Mar 3 15:51:45 victoria kernel: wlan0: [e8:fc:af:94:fc:fc] ieee80211_ht_node_init: called Mar 3 15:51:45 victoria kernel: wlan0: ieee80211_new_state_locked: SCAN -> AUTH (nrunning 0 nscanning 0) Mar 3 15:51:45 victoria kernel: wlan0: ieee80211_newstate_cb: SCAN -> AUTH arg 192 Mar 3 15:51:45 victoria kernel: wlan0: sta_newstate: SCAN -> AUTH (192) Mar 3 15:51:45 victoria kernel: wlan0: ieee80211_new_state_locked: AUTH -> ASSOC (nrunning 0 nscanning 0) Mar 3 15:51:45 victoria kernel: wlan0: ieee80211_newstate_cb: AUTH -> ASSOC arg 0 Mar 3 15:51:45 victoria kernel: wlan0: sta_newstate: AUTH -> ASSOC (0) Mar 3 15:51:45 victoria kernel: wlan0: [e8:fc:af:94:fc:fc] assoc success at aid 11: long preamble, long slot time, QoS, HT20 (+AMPDU) Mar 3 15:51:45 victoria kernel: wlan0: ieee80211_new_state_locked: ASSOC -> RUN (nrunning 0 nscanning 0) Mar 3 15:51:45 victoria kernel: wlan0: ieee80211_newstate_cb: ASSOC -> RUN arg 16 Mar 3 15:51:45 victoria kernel: wlan0: sta_newstate: ASSOC -> RUN (16) Mar 3 15:51:45 victoria kernel: wlan0: link state changed to UP Mar 3 15:51:52 victoria dhclient: New IP Address (wlan0): 192.168.5.64 Mar 3 15:51:52 victoria dhclient: New Subnet Mask (wlan0): 255.255.0.0 Mar 3 15:51:52 victoria dhclient: New Broadcast Address (wlan0): 192.168.255.255 Mar 3 15:51:52 victoria dhclient: New Routers (wlan0): 192.168.1.1 ..the transmit rate is showing up as 11b, not 11b rates (sysctl dev.iwn.0.debug=0x1, and I can kinda read the plcp/rate values now ... sigh. :) Anyway, I know this used to work fine, so I'll have to go over the net80211 changes to see when they broke. Thanks, -adrian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=HHRC=dYLQJP4pXrAFOcH%2BZFU%2BYddvuSQJmAndgdTiEg>